Micro 100 › 3 hole 8 inch 2

Micro 100 Engraving Blank Carbide 3/8 QSP-375-2.0

Engraving Blank Carbide Single End 3/8 in Bright (Uncoated) Fractional Inch 0.3750 more

MICRO 100 AL-6 Brazed Tool Bit,AL,2.5 In L,3/8 In W

Single-Point Tool Bit, AL, Carbide, Zinc, Left Hand, Shank Width 3/8 in more

MICRO 100 BL-6 Brazed Tool Bit,BL,2.5 In L,3/8 In W

Single-Point Tool Bit, BL, Carbide, Zinc, Left Hand, Shank Width 3/8 in more

Micro 100 Engraving Blank Carbide 3/8 QSR-375-2.5

Engraving Blank Carbide Single End 3/8 in Bright (Uncoated) Fractional Inch 0.3750 more

Micro 100 Engraving Tool 3/8 L of Cut Carbide RSC-125-2

Engraving Tool Double End 60 Degrees Carbide Bright (Uncoated) Fractional Inch .004 in 3/8 in more

Micro 100 Engraving Tool 3/8 L of Cut Carbide RNC-250-2

Engraving Tool Double End 90 Degrees Carbide Bright (Uncoated) Fractional Inch .004 in 3/8 in more

Micro 100 Engraving Tool 3/8 L of Cut Carbide RTC-125-2

Engraving Tool Double End 30 Degrees Carbide Bright (Uncoated) Fractional Inch 0.0040 in 3/8 in more

Micro 100 CR End Mill 0.020 CR 3/16 Dia 5/8 Cut GEC-187-2-030

Corner Radius End Mill 3/16 in Milling Dia. Bright (Uncoated) Fractional Inch 0.030 in 5/8 in 2 in more

Micro 100 Sq. End Mill Single End Carb 3/8 GEM-375-2

Square End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0200 rad GEC-375-3-030

Corner Radius End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.03 in 7/8 in 2 1/2 in more

Micro 100 Engraving Blank Carbide 3/8 QSR-375-3.5

Engraving Blank Carbide Single End 3/8 in Bright (Uncoated) Fractional Inch 0.3750 more

Micro 100 Engraving Blank Carbide 3/8 QSP-375-3.5

Engraving Blank Carbide Single End 3/8 in Bright (Uncoated) Fractional Inch 0.3750 more

Micro 100 Sq. End Mill Single End Carb 3/8 EMS-375-3

Square End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Sq. End Mill Single End Carb 3/8 GEM-375-3

Square End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Straight Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0200 rad VHS-250-5-020

Corner Radius End Mill 1/4 in Milling Dia. Carbide Bright (Uncoated) Weldon Flat Fractional Inch 0.02 in 1/2 in 2 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0200 rad GEC-375-4-030X

Corner Radius End Mill 3/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.03 in 7/8 in 2 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0600 rad ARC-375-5-060X

Corner Radius End Mill 3/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.06 in 7/8 in 2 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0600 rad ARC-375-5-060

Corner Radius End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.06 in 7/8 in 2 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0100 rad GEC-375-4-010

Corner Radius End Mill 3/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.01 in 7/8 in 2 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0200 rad VHM-375-5-020K

Corner Radius End Mill 3/8 in Milling Dia. Carbide nACRo Weldon Flat Fractional Inch 0.02 in 7/8 in 2 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-3-020X

Corner Radius End Mill 1/8 in Milling Dia. Carbide AlTiN Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 Cor Rad End Mill 3/8 Carb 0.0200 rad VLM-500-5-090K

Corner Radius End Mill 1/2 in Milling Dia. Carbide nACRo Weldon Flat Fractional Inch 0.09 in 1 3/4 in 4 1/2 in more

Micro 100 Cor Rad End Mill 1/8 Carb 0.0200 rad GEC-125-3-020

Corner Radius End Mill 1/8 in Milling Dia. Carbide Bright (Uncoated) Straight Fractional Inch 0.02 in 1/2 in 1 1/2 in more

Micro 100 CR End Mill 0.090 CR 5/8 Dia 1-1/4 Cut ARC-625-3-090

Corner Radius End Mill 5/8 in Milling Dia. Bright (Uncoated) Fractional Inch 0.090 in 1 1/4 in 3 1/2 in more

Micro 100 Carb End Mill 5/8 In 3FL CC Uncoated GEC-625-3-090

Corner Radius End Mill 5/8 in Milling Dia. Bright (Uncoated) Fractional Inch 0.090 in 1 1/4 in 3 1/2 in more

Micro 100 Carb End Mill 5/8 In 3FL CC Uncoated GEC-625-3-030

Corner Radius End Mill 5/8 in Milling Dia. Bright (Uncoated) Fractional Inch 0.030 in 1 1/4 in 3 1/2 in more

Micro 100 Engraving Blank Carbide 3/8 RS-375-24

Engraving Blank Carbide Double End 3/8 in Bright (Uncoated) Fractional Inch 0.3750 more

Micro 100 Solid Router Bit 3/8 Diamond Cut RDE-100

Solid Router Bit Primary Material Application Composite Fishtail Fractional Inch 3/8 in Cutter Dia. more

Micro 100 Engraving Tool 3/8 L of Cut Carbide RNC-187-13

Engraving Tool Single End 90 Degrees Carbide Bright (Uncoated) Fractional Inch .004 in 3/8 in more

Micro 100 Engraving Tool 3/8 L of Cut Carbide RSC-125-1

Engraving Tool Single End 60 Degrees Carbide Bright (Uncoated) Fractional Inch .004 in 3/8 in more

Micro 100 Engraving Tool 3/8 L of Cut Carbide RNC-125-1

Engraving Tool Single End 90 Degrees Carbide Bright (Uncoated) Fractional Inch .004 in 3/8 in more

Micro 100 Engraving Tool 3/8 L of Cut Carbide RTC-125-23

Engraving Tool Double End 30 Degrees Carbide Bright (Uncoated) Fractional Inch 0.0040 in 3/8 in more

Micro 100 Solid Router Bit 3/8 Spiral Downcut SFA-375-69

Solid Router Bit Primary Material Application Aluminum Spiral Upcut Fractional Inch 3/8 in Cutter Dia. more

Micro 100 Solid Router Bit 3/8 Spiral Downcut SFL-375-69

Solid Router Bit Primary Material Application Composite Spiral Downcut Fractional Inch 3/8 in Cutter Dia. more

Micro 100 Drill Mill 3/8 Carbide AlTiN DM-500-490X

Drill Mill Carbide AlTiN 1/2 in Milling Dia. 90 Degrees more

Micro 100 Sq. End Mill Single End Carb 3/8 SHR-375-4X

Square End Mill 3/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more

Micro 100 Drill Mill 3/8 Carbide Bright DM-500-490

Drill Mill Carbide Bright (Uncoated) 1/2 in Milling Dia. 90 Degrees more

Micro 100 Sq. End Mill Single End Carb 3/8 GEM-375-4X

Square End Mill 3/8 in Milling Dia. Carbide AlTiN Straight Length of Cut 7/8 in Overall Length 2 1/2 in Shank Dia. 3/8 in more