1PACK Prime-Line 1/2 In. Offset Ball Bearing Wheel Adjustable Bypass Door Roller (2-Count)

Premium Bypass Closet Door Track Kit 72 inch with Supreme Smooth Sliding Door Roller Kit

Full sliding bypass door hardware set: bypass door rail silver track – 1pc, three wheel ball-bearing rollers pulleys – 4pcs, adjustable floor guide – 1pc, door stopper – 1pc, finger pulls – 2pcs, wrench and screws – 1set. ... more

Prime-Line 1-1/4 in. Ball Bearing Sliding Door Roller Assembly (Single Pack) 5.4 H x 3.75 W x 1.2 D in Yellow | 5.4" H X 3.75" W X 1.2" D | Wayfair

This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 9/16 in. wide with a 13/16 in. flare and 1-3/16 in. tall. It is rear adjusting with a threaded mounting... ... more

Prime-Line Closet Door Roller, Front, 1/2 in. Offset, 3/4 in. Wheel, Atlas 3.1 H x 1.38 W x 0.88 D in gray in Silver | Wayfair N 6627

Set includes 2 door rollers Features a top hung side mounted design Side mounting to back of door 0.5" offset adjustable bracket 0.75" Wheel outer diameter Comes with flat edge plastic wheel Prime-Line | Prime-Line Closet Door Roller, Front, 1/2 in.... ... more

Prime-Line 1-1/8 in. Ball Bearing Door Roller Assembly, for Viking (Single Pack) 5.4 H x 3.75 W x 1.2 D in yellow in Golden | Wayfair D 1540

This is a E-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 19/32 in. wide with... ... more

Prime-Line 1-1/4 in. Ball Bearing Sliding Door Roller Assembly (Single Pack) 8.4 H x 3.8 W x 1.2 D in brown in Zinc Plated | Wayfair D 1918

This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more

Prime-Line Bypass Door Roller Assembly, 1-1/2 in. Ball Bearing (Single Pack) 3.45 H x 0.68 W x 0.5 D in gray/white in Silver;white | Wayfair N 6598

This Bypass Door Roller assembly is constructed from nylon. It features a ball bearing roller with an adjustable aluminum-housing bracket. Monarch door company uses this type or roller for 500 series aluminum frame doors. Prime-Line | Prime-Line Bypass... ... more

Prime-Line 1-1/4 in. Ball Bearing Tandem Roller Assembly, Reversed F-Tab (Single Pack) 8.4 H x 3.8 W x 1.2 D in Yellow | Wayfair D 1880

This is a reversed F-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/8 in. tall with a flare width of 13/16 in.. There are two 1-1/4 in. concave or grooved steel ball bearing rollers. Used by Fleetwood and a... ... more

Prime-Line Sliding Door Roller Assembly, 1-1/2 in. Plastic Wheel, Steel Ball Bearings, Grooved Edge | 6.35" H X 3.75" W X 0.65" D | Wayfair D 1683

This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more

Prime-Line Mirror Door Roller, 1-1/8 in. Ball Bearing Grooved Roller (Single Pack) 1.13 H x 2.44 W x 0.57 D in yellow in Gold | Wayfair N 6574

This Mirror Door Roller features a steel constructed ball bearing roller. It comes affixed to an adjustable steel housing assembly. This style roller is used on Crest Mirror Door and similar style mirrored wardrobe doors. Prime-Line Size: 1.13" H x... ... more

Prime-Line Shower Door Roller, 3/4 in, Plastic, Steel Ball Bearing, Round Edge 2.8 H x 3.6 W x 0.55 D in White | 0.55" L x 3.6" W x 2.8" H | Wayfair

These shower door rollers are constructed of durable plastic and include an #8-32 threaded hex hub manufactured into each wheel. Wheels like these are used to replace missing or damaged wheels on shower door roller assemblies and the like. These... ... more

Prime-Line Single 1-1/4 in. Ball Bearing Roller, F-Tab Style, Adjustable (Single Pack) 5.4 H x 3.8 W x 1.05 D in gray in Silver | Wayfair D 1519

This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more

Prime-Line Single 1-1/4 in. Ball Bearing Roller, U-Back Style, Adjustable (Single Pack) 5.4 H x 3.75 W x 0.85 D in brown in Zinc Plated | Wayfair

This is a U-back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting... ... more

Prime-Line Single 1-1/4 in. Ball Bearing Roller, F-Tab Style, Adjustable (Single Pack) 5.44 H x 3.81 W x 0.63 D in yellow in Gold;yellow | Wayfair

This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more

Prime-Line Single 1-1/2 in. Ball Bearing Roller, F-Tab Style, Adjustable (Single Pack) 6.4 H x 3.75 W x 0.75 D in Unfinished Plastic | Wayfair

This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved Plastic ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more

Prime-Line Single 1-1/2 in. Ball Bearing Roller, F-Tab Style, Adjustable (Single Pack) 5.35 H x 3.7 W x 0.5 D in brown in Zinc Plated | Wayfair

This is a F-tab patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more

Prime-Line Roller Assembly, 1-1/4 in. Steel Ball Bearing, Adjustable (Single Pack) 0.75 H x 4.0 W x 5.0 D in Brown | 0.75" H X 4" W X 5" D | Wayfair

This is a universal design roller. It has a 1-1/4 in. steel ball bearing roller. Adjustable diecast housing assembly. Used by Fleetwood, Full view and a variety of other glass door manufacturers. Prime-Line | Prime-Line Roller Assembly, 1-1/4 in. Steel... ... more

Prime-Line 1-3/16 in. Steel Ball Bearing Closet Door Roller 1.19 H x 2.5 W x 0.5 D in yellow in Gold | 1.19" H X 2.5" W X 0.5" D | Wayfair N 6686

Set includes 2 door rollers Constructed from steel and features a center grooved design Fits a 2.94" x 0.44" mortise slot in door rail Carrying capacity of 50 lbs. 1.19" Outer diameter center grooved steel ball bearing wheel Used with your sliding wood... ... more

Prime-Line 1-1/4 in. Nylon Ball Bearing Sliding Door Tandem Roller Assembly (Single Pack) 7.4 H x 3.8 W x 1.05 D in gray in Silver | Wayfair D 1920

This is a plain back tandem roller assembly with two 1-1/4 in. concave steel ball bearing rollers. The stamped steel housing is adjustable. Used by Milgard as well as a variety of other manufacturers, primarily on vinyl patio doors. The housing is... ... more

Prime-Line 1-1/2 in. Ball Bearing Steel Sliding Door Roller Assembly, for Pella (Single Pack) 7.4 H x 3.75 W x 0.85 D in brown | Wayfair D 1998

Replace or repair broken or missing sliding door rollers with this Prime-Line D 1998 Steel Sliding Door Roller Assembly. The stamped steel patio door rollers replacement is adjustable. This door roller assembly is used by a variety of metal framed... ... more

Prime-Line 1-1/2 in. Steel Ball Bearing Sliding Door Tandem Roller Assembly (Single Pack) 7.44 H x 3.81 W x 1.13 D in gray in Silver | Wayfair

This is a plain back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is a plain... ... more

Prime-Line Sliding Door Roller Assembly, 1-1/4 in. Diameter, Steel Ball Bearing (Single Pack) 0.88 H x 4.0 W x 3.0 D in brown in Zinc Plated | Wayfair

This roller is constructed from steel. It comes affixed to an adjustable steel housing with an 1-1/4 in. diameter roller. Used by a variety of glass door manufacturers. Prime-Line | Prime-Line Sliding Door Roller Assembly, 1-1/4 in. Diameter, Steel... ... more

Prime-Line 7/8 in, Nylon, Tub Enclosure Oval Edge Ball Bearing Roller 5.4 H x 3.8 W x 0.75 D in White | 0.75" L x 3.8" W x 5.4" H | Wayfair M 6153

This is a 7/8 in. tub and shower door nylon ball bearing roller with a rounded edged wheel. It has a threaded hex head hub that uses an 8 in. long Phillips binder head machine screw to fasten it to the door bracket. Used on a variety of different tub... ... more

Prime-Line 3/4 in, Flat Roller Ball Bearing Tub Enclosure w/ Threaded Hex Hub 5.4 H x 3.75 W x 0.45 D, in White | Wayfair M 6001

This is a 3/4 in. tub and shower door nylon ball bearing roller with a flat edged wheel. It has a threaded hex head hub that uses an 8-32 x 3/8 in. long Phillips binder head machine screw to fasten it to the door bracket. Used on a variety of different... ... more

Prime-Line Roller Assembly, 1-1/4 in. Tandem Wheels, Concave Edge, Steel Ball (Single Pack) 0.88 H x 5.0 W x 5.5 D in yellow in Gold;yellow | Wayfair

This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved edge and features a steel inner race, steel ball bearings and a 5/16 in. roller width. The outside diameter of these... ... more

Prime-Line Adjustable 1-1/2 in. Sliding Patio Door Roller Assembly (Single Pack) 6.4 H x 3.75 W x 1.15 D in brown in Zinc Plated | Wayfair D 1600

This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The stamped steel housing is 3/4 in. wide, with a 7/8 in. flare, and is 1-9/16 in. tall. Features a rear adjusting threaded mounting hole on the back... ... more

Prime-Line Wood Closet Door Roller, 1 in. Concave Roller, Bottom Mount 0.9 H x 1.4 W x 0.45 D in gray in Silver | 0.9" H X 1.4" W X 0.45" D | Wayfair

Fits 1.25" x 0.63" mortise slot in door rail Made in the USA 1" Wheel diameter Features a center grooved ball bearing wheel Steel construction Set includes: 2 Door rollers Prime-Line | Prime-Line Wood Closet Door Roller, 1 in. Concave Roller, Bottom... ... more

Prime-Line Steel Sliding Door Roller Tandem Assembly, 1-1/4 Inches D x 5/16 Inches W, Steel | 9.35" H X 3.75" W X 1.55" D | Wayfair D 1607

This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved (center grooved) edge and features a steel inner race, steel ball bearings and a 5/16 in. roller width. The outside... ... more

Prime-Line 7/8 in. Tandem Wardrobe Door Roller Assembly, Rear 0.75 H x 4.0 W x 5.25 D in gray in Silver | 0.75" H X 4" W X 5.25" D | Wayfair MP6503

This is a side mounted, top hung wardrobe roller assembly with a tandem 7/8 in. convex nylon wheel for the back sliding wardrobe door. The stamped steel bracket assembly is adjustable and has an 1/2 in. offset. It is fitted onto the wardrobe front door... ... more

Prime-Line Pocket Door Roller Assembly, 13/16 in, Convex, Plastic Tires | 1.05" H X 2.15" W X 1.3" D | Wayfair N 7065

This Convex Pocket Door Roller is constructed of a steel bracket and ball bearings with plastic tires. The wheels are constructed of durable plastic which provide for a smooth, long-lasting, quiet operation, and they feature convex (round) edges. These... ... more

Prime-Line Steel Door Roller gray in Silver | Wayfair GD 52103

This is a standard door roller with a convex edge, suitable for use with 2 in. track garage doors. It has a 1-7/8 in. roller diameter, 1/2 in. roller width. Nylon ball bearing roller. Standard shaft length of 3-5/8in. Prime-Line | Prime-Line Steel Door... ... more

Prime-Line Wardrobe Door Back Roller 3.81 H x 5.44 W x 0.63 D in gray, Nylon in Chrome | 3.81" H X 5.44" W X 0.63" D | Wayfair N 6517

0.5'' Offset adjustable bracket, round edge nylon ball bearing wheel Single wheel, top hung, side mounting Mount: Side Prime-Line | Prime-Line Wardrobe Door Back Roller 3.81 H x 5.44 W x 0.63 D in gray, Nylon in Chrome | 3.81" H X 5.44" W X 0.63" D |... ... more

Prime-Line Single 1-1/4 in. Nylon Roller Assembly, Track Cleaner, Unique Back Housing (Single Pack) 5.44 H x 3.82 W x 0.88 D | Wayfair D 1794

This is an adjustable diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used primarily by Canadian Patio Door Manufacturers. It's plain back diecast housing is 1/2 in. wide, 1 in. tall and 1-9/16 in. long.... ... more

Prime-Line Storm Door Protector Chain & Spring Finish (Single Pack) 7.9 H x 3.65 W x 1.15 D, Nylon in Black | 7.9" H X 3.65" W X 1.15" D | Wayfair

This is a 7/8 in. tub and shower door nylon ball bearing roller with a flat edged wheel. It has a threaded hex head hub that uses an 8-32 x 3/8 in. long Phillips binder head machine screw to fasten it to the door bracket. Used on a variety of different... ... more