Prime Line Products › 100 pack 4 x 1

Prime-Line 9062243 Carriage Bolts 1/4 in.-20 X 1-1/2 in. Grade 18-8 Stainless Steel 100-Pack

Carriage bolts feature a slightly rounded head and have no exposed sharp edges when fully fastened. Due to that reason they are often used when a more aesthetic look is desired. They are commonly used on docks and on playground equipment or in cases... more

Prime-Line Diecast Finish, Flush Sliding Patio Door Handle w/ Pull, Croft (Single Pack) 10.0 H x 4.95 W x 1.4 D in/brown in Black | Wayfair C 1130

This non-handed diecast black flush mount patio door handle with wood pull is a design that fits Croft series 301 patio doors, and a variety of other manufacturers of 7/8 in. to 1-1/8 in. thick patio doors. It comes with a shim to accommodate the... more

Prime-Line Pilaster Shoe Kit, Fits 8 in. Wide Pilasters, , Oval End (Single Pack) 1.75 H x 4.0 W x 10.0 D in gray | Wayfair 658-3009-8

These pilaster shoe kits are constructed of an 18 gauge steel anchor bracket and a 22 gauge, satin-finished stainless steel pilaster shoe. They feature a 3-inch tall reach and oval ends. Each bracket is slotted at the horizontal base, on each end for... more

Prime-Line Sash Balance Take-Out Clip 1.0 H x 4.0 W x 7.25 D in gray in Silver | 1" H X 4" W X 7.25" D | Wayfair H 3664

This is a sash balance take out clips are constructed from spring steel. They come in a pack of 100. These sash balance take out clips are used on block and tackle type sash balances. | Prime-Line Sash Balance Take-Out Clip 1.0 H x 4.0 W x 7.25 D in... more

Prime-Line 9054945 Hex Lag Screws 1/4 In. X 1-1/2 In. A307 Grade A Zinc Plated Steel (100 Pack) C31

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on Phillips head screws though a pilot hole is still... more

1/4 in. x 3/4 in. White Plastic Screen Frame Corner (100-pack)

This 3/4 in. x 1/4 in. plastic corner for window screen panels is designed to fit into square-cut ends of 1/4 aluminum screen frame material to repair or construct new aluminum-framed screens. Square-cut assembly eliminates the need for miter cutting... more

Machine Screws Round Head Phillips/Slotted Combination Drive #10-32 X 1-1/4 in. Grade 18-8 Stainless Steel 100-Pack

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more

Sheet Metal Screws Self-Tapping Pan Head Phillips Drive #8 X 1-1/4 in. Grade 18-8 Stainless Steel 100-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a hole. more

Drywall Screws #6 x 1-1/4 in. Coarse Thread Phillips Head Drive Flat Head (100-pack)

These drywall screws are constructed of metal and come in a black phosphate finish. They feature Phillips drives flat heads and sharp easy-start points. These fasteners are designed for the installation of drywall and sheetrock also known as gypsum... more

Prime-Line 9035187 Wood Screw Flat Head Phillips #8 X 1-1/4 in Solid Brass Pack of 100

Prime-Line 9035187 Wood Screw Flat Head Phillips #8 X 1-1/4 in Solid Brass Pack of 100 Wood screws are used to attach two pieces of wood together and they feature a pointed tip that helps drive into wood. Pilot holes are sometimes needed to avoid... more

Machine Screws Round Head Phillips/Slotted Combination Drive #6-32 X 1-1/4 in. Grade 18-8 Stainless Steel 100-Pack

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more

Wood Screws Flat Head Phillips Drive #6 X 1-1/4 in. Solid Brass 100-Pack

Wood screws are used to attach two pieces of wood together and they feature a pointed tip that helps drive into wood. Pilot holes are sometimes needed to avoid splitting the wood. more

Hex Lag Screws 1/4 in. X 2-1/2 in. A307 Grade A Zinc Plated Steel 100-Pack

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws though a pilot hole is still... more

Prime-Line 9054850 Hex Lag Screws 1/4 in. X 1 in. A307 Grade A Zinc Plated Steel 100-Pack

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws though a pilot hole is still... more

Hex Lag Screws 1/4 in. X 3-1/2 in. A307 Grade A Zinc Plated Steel 100-Pack

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws though a pilot hole is still... more

Prime-Line 9005374 Machine Screws Round Head Phillips/Slotted Combination Drive 1/4 in.-20 X 1 in. Grade 18-8 Stainless Steel 100-Pack

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more

Wood Screws Flat Head Phillips Drive #10 X 1-1/4 in. Zinc Plated Steel 100-Pack

Wood screws are used to attach two pieces of wood together and they feature a pointed tip that helps drive into wood. Pilot holes are sometimes needed to avoid splitting the wood. more

Prime-Line 9062146 Carriage Bolts 1/4 in.-20 X 1 in. A307 Grade A Zinc Plated Steel 100-Pack

Carriage bolts feature a slightly rounded head and have no exposed sharp edges when fully fastened. Due to that reason they are often used when a more aesthetic look is desired. They are commonly used on docks and on playground equipment or in cases... more

Wood Screws Flat Head Phillips Drive #12 X 1-1/4 in. Zinc Plated Steel 100-Pack

Wood screws are used to attach two pieces of wood together and they feature a pointed tip that helps drive into wood. Pilot holes are sometimes needed to avoid splitting the wood. more

Sheet Metal Screws Self-Tapping Pan Head Phillips Drive #10 X 1-1/4 in. Grade 18-8 Stainless Steel 100-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a hole. more

Wood Screws Flat Head Phillips Drive #10 X 1-1/4 in. Solid Brass 100-Pack

Wood screws are used to attach two pieces of wood together and they feature a pointed tip that helps drive into wood. Pilot holes are sometimes needed to avoid splitting the wood. more

Machine Screws Round Head Phillips/Slotted Combination Drive #8-32 X 1-3/4 in. Grade 18-8 Stainless Steel 100-Pack

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more

Prime-Line 9000703 Machine Screws Flat Head Phillips Drive #8-32 X 1/4 In. Zinc Plated Steel (100 Pack)

Prime-Line 9000703 Machine Screws Flat Head Phillips Drive #8-32 X 1/4 In. Zinc Plated Steel (100 Pack) Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with... more

Prime-Line 9000472 Machine Screws Flat Head Phillips Drive #6-32 X 1/4 in. Solid Brass 100-Pack

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more

Prime-Line 9000367 Machine Screws Flat Head Phillips Drive #4-40 X 1 in. Zinc Plated Steel 100-Pack

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more

Prime-Line 9000703 Machine Screws Flat Head Phillips Drive #8-32 X 1/4 in. Zinc Plated Steel 100-Pack

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more

Prime-Line 9016776 Sheet Metal Screws Self-Tapping Flat Head Phillips Drive #8 X 1-3/4 in. Grade 18-8 Stainless Steel 100-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a hole. more

Prime-Line 9014363 Machine Screws One-Way Round Head #8-32 X 3/4 in. Zinc Plated Steel 100-Pack

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. These machine screws feature... more

Prime-Line 9055061 Hex Lag Screws 1/4 In. X 2 In A307 Grade A Hot Dip Galvanized Steel (100 Pack) Zinc C31

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on Phillips head screws though a pilot hole is still... more

Prime-Line 9034351 Wood Screws Flat Head Phillips Drive #4 X 1 in. Solid Brass 100-Pack

Wood screws are used to attach two pieces of wood together and they feature a pointed tip that helps drive into wood. Pilot holes are sometimes needed to avoid splitting the wood. more

Prime-Line 9018978 Sheet Metal Screws Self-Tapping Pan Head Phillips Drive #4 X 1/2 in. Grade 18-8 Stainless Steel 100-Pack

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood it is especially important to pre-drill a hole. more

Flat Washers USS 1/4 in. X 47/64 in. OD Hot Dip Galvanized Steel 100-Pack

Flat washers are the most widely used types of general purpose washers and are most often paired with standard bolts and hex nuts. They distribute the force from the bolt head & nut over a larger area which serves to protect the surface of the material... more

Hex Lag Screws 1/4 in. X 3 in. A307 Grade A Zinc Plated Steel 100-Pack

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws though a pilot hole is still... more

Prime-Line 9055135 Hex Lag Screws 1/4 In. X 3 In. A307 Grade A Zinc Plated Steel (100 Pack) C31

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on Phillips head screws though a pilot hole is still... more

Prime-Line Tek Screws,8 X 1/2", Zinc-Plated, Self-Drilling, Hex Head 0.63 H x 4.0 W x 5.0 D in gray, Metal | 5.0" L x 4.0" W x 0.63" H | Wayfair

These hex head Tek screws come zinc-plated in packs of 100. These #8 x 1/2 in. self-drilling fasteners are ideal for attaching sheets of sheet metal together, without the need to predrill pilot holes | Prime-Line Tek Screws,8 X 1/2", Zinc-Plated,... more

Prime-Line 9071931 U-Bolts Round Bend 1/4 In.-20 X 1-1/8 In. X 2-1/4 in (10 Pack) C31

U-bolts feature machine threading on both arms and are designed to be inserted into two pre-drilled holes. They are primarily used to anchor cylindrical objects such as pipe conduit cable tubing round bar or rope. In some applications U-bolts may be... more

Prime-Line 9071912 U-Bolts Round Bend 1/4 in.-20 X 1 in. X 1-3/4 in. - (1/2 in. Pipe) Zinc Plated Steel 10-Pack

U-bolts feature machine threading on both arms and are designed to be inserted into two pre-drilled holes. They are primarily used to anchor cylindrical objects such as pipe conduit cable tubing round bar or rope. In some applications U-bolts may be... more

Prime-Line 9071912 U-Bolts Round Bend 1/4 In.-20 X 1 In. X 1-3/4 In. - for 1/2 In. Pipe (10 Pack) C31

U-bolts feature machine threading on both arms and are designed to be inserted into two pre-drilled holes. They are primarily used to anchor cylindrical objects such as pipe conduit cable tubing round bar or rope. In some applications U-bolts may be... more