See Matches In
Narrow Search Results
Price Range
Brand
Stores
Best Seller | This is a K-tab patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The T-shaped tab (K-tab) is simply slid up into a T-shaped receptacle in the bottom of the patio door. No screws are required. The housing is 3/4 in. wide... more | go to store |
This is a E-tab patio door roller assembly with a 1-1/8 in. concave steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 19/32 in. wide with... more | go to store |
This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... more | go to store |
Slide Latch, 2-3/4" Centers, with Offset Bar, Chrome. 2-3/4 Inch Hole Center Spacing. Supplied With Offset Slide Bolt. Use with Bobrick Manufacturers. | Prime-Line Slide Latch, 2-3/4 in. H.C, Chrome Plated (Single Pack) in Gray | 1.75 H x 4 W x 5 D in... more | go to store |
These rosettes are constructed from steel and come plated in brass. The 2-1/4 in. diameter rosettes have 1-3/4 in. hole centers. For old style passage locks; fits standard knobs. Easily mounts to your door with included screws. Note: these rosettes... more | go to store |
This heavy gauge steel constructed strike comes plated in brass. It replaces most deadbolt strikes for increased security, a result of securing 3 in. screws to wall stud. The plate measures 1-1/4 in. wide by 3-5/8 in. long and is used with most entry... more | go to store |
This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a... more | go to store |
This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... more | go to store |
This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... more | go to store |
This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... more | go to store |
These rosettes are constructed from steel and come plated in brass. The 2-1/4 in. diameter rosettes have 1-3/4 in. hole centers. For old style passage locks; fits standard knobs. Easily mounts to your door with included screws. Note: these rosettes... more | go to store |
This rectangular-shaped slide latch is constructed of diecast Zamak and comes in a polished chrome-plated finish. It is a concealed slide latch and features a 1/4 in. bolt throw. This slide latch includes 2 Phillips head fasteners required for... more | go to store |
This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are... more | FREE shipping go to store |
This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. | Prime-Line Bi-Fold Door... more | go to store |
This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... more | go to store |
Prime-Line 3/8 in. Screen Clips w/ Screws in Black | 5.4 H x 3.75 W x 1.2 D in | Wayfair PL 7736 These are diecast clips used to secure window screens, storm windows, and storm door panels. Accepts a #10 screw. | Prime-Line 3/8 in. Screen Clips w/ Screws in Black | 5.4 H x 3.75 W x 1.2 D in | Wayfair more | go to store |
This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator. | Prime-Line 3/8 in. Spline Socket, Tee Handle, Stone Color in Gray | 5.4 H x 3.75 W x 1.2 D... more | go to store |
This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... more | go to store |
Designed for use with a concealed latching mechanism, it has an offset bolt with a flat tip, and it assembles easily with a push nut fastener. This lever set has a 1-3/4 in. outside diameter, and it features an overall reach of 2-21/32 inches with a... more | go to store |
This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum... more | go to store |
These wall brackets are constructed of zinc alloy (cast Zamak) and they come in a chrome plated finish. They feature a single ear that can be mounted to the left or right side of the panel, and they have a 2-1/2 in. overall reach, with a 2 in. wide... more | go to store |
This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum... more | go to store |
These wall brackets are constructed of 14 ga. stamped stainless steel and they come in a satin finish. They feature dual ears for greater stability, and they are designed for use with 1 in. thick panels. Wall brackets like these are manufactured in... more | go to store |
Prime-Line Two Ear Wall Bracket, For" Panels in Gray | 1.5 H x 4 W x 3.5 D in | Wayfair 656-6365 These wall brackets are constructed of zinc alloy (cast Zamak) and they come in a chrome plated finish. They feature dual ears for greater stability, and they are designed for use with 1 in. thick panels. Wall brackets like these are manufactured in... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This insert style sliding screen... more | go to store |
Can be used in a variety of applications, from locking a gate to a cabinet or even a truck box. | Prime-Line Safety Hasp, 3-1/2 in, Steel Construction, Zinc Plated Finish (Single Pack) Metal in Gray | 4 H x 5 W x 1 D in | Wayfair more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It is 3/4 in. wide with a 27/32 in. flare, 1-5/8 in. tall and 1-1/2 in. long (not including the inner roller housing). It is rear adjusting... more | go to store |
This is a unique housing patio door roller assembly. It is 23/32 in. wide, 1-7/8 in. tall, and 2-1/8 in. long with a 1-1/4 in. diameter steel ball-bearing roller. To install, remove the screw from the back and insert the assembly into the bottom rail... more | go to store |
This is two piece roller assembly used on Ador Hilite patio doors. The outer housing is 5/8 in. wide, 31/32 in. tall with a 11/32 in. flare width and has two hook tabs on top. The inner housing holds a 1-1/2 in. steel ball bearing roller. Together,... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. The housing is 3/4 in. wide with a 7/8 in. flare and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end. It is... more | go to store |
This is a stamped steel bracket with a flat edge brass roller. Used on International windows. | Prime-Line Roller Assembly, 1/2 in. Brass Flat Roller, for Academy, IWC & A-1 Aluminum Windows in Gray | 5.4 H x 3.75 W x 0.65 D in | Wayfair more | go to store |
This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a... more | go to store |
These shower door bottom guides are constructed of injection-molded plastic and come clear in color. Each guide includes a strip of double sided adhesive tape to allow for ease of installation. The channels feature 1/2 in. wide openings that will allow... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... more | go to store |
This cylinder is constructed from solid brass and comes in an in a polished brass finish. It features a Segal SE-1 keyway with a 5 pin tumbler and includes 2 cam options with 2 keys. This cylinder has a 1-1/8 in. outside diameter at 1-1/4 in. in length... more | go to store |
This patio door latch lever is constructed of steel and diecast components. It features a 1/2 in. diameter centering ring and a 3/4 in. long tailpiece. This is a replacement latch for Prime-Line part C-1131 mortise style sliding door handle set, and it... more | go to store |
These wall brackets are constructed of zinc alloy (cast Zamak) and they come in a chrome plated finish. They feature a single ear that can be mounted to the left or right side of the panel, and they have a 2-1/2 in. overall reach, with a 2 in. wide... more | go to store |
Ads related to 1 2 3 4 5