1 2 3 4 1

TE-CO 42946 Eye Bolt With Shoulder, 1/2"-13, 4-1/2 in Shank, 3/8 in ID, Steel,

Rod End, Eye Inside Diameter 3/8 in, Eye Outside Diameter 1 in, Eye Thickness 1/2 in, Black Oxide, Steel, Material Grade/Class Grade 2, Material Quality Standards ASTM A311, REACH Compliant Yes, Hole Center-to-End Length 5 in, RoHS Compliant Yes, Shank... more

ZORO SELECT 1JA99 Coupling Nut, 3/4"-10, Steel, Grade 2, Zinc Plated, 2-1/4 in

Coupling Nut, Material Grade/Class Grade 2, Material Steel, Finish Zinc Plated, Thread Size 3/4 In.-10, Thread Style Fully Threaded, Hex Width 1 in, Overall Length 2 1/4 in, Dimensional Standards ASME B18.2.2, RoHS Compliant, Material Quality Standards... more

ZORO SELECT U17567.025.0050 Round U-Bolt, 1/4"-20, 1 in Wd, 1 3/4 in Ht, Plain

Standard U-Bolt, Standard U-Bolt, 304 Stainless Steel, Finish Plain, Thread Size 1/4 In.-20, Thread Length 1 in, Inside Length 1 3/4 in, Inside Width 1 in, Pipe Size (In.) 1/2 in, Characteristics Has Coarse Rolled Threads, for Steel or Wrought Iron... more

BUYERS PRODUCTS HBF12 Vent Plug, 3/4 NPT Thread Size, 1.625 H, 3 1/4 in Top Cap

Vent Plug, Relief/Filler, Thread Size 3/4 In., Height 1.625, Top Cap Dia. (In.) 3 1/4 in, Overall Length (In.) 2 13/16 in, Allow Sealed Pressure Systems to Vent Off Excess Pressure as Heat in System Builds up, Air Pressure is Allowed Back into System... more

ZORO SELECT 1NAN9 Ext Spring,Cot,Stl,1 3/4 OAL,1/2 OD,PK6

Extension Spring, Cot, High Carbon Steel, Zinc Plated, End Type Machine Hooks, Overall Length 1-3/4 In., Outside Dia. 1/2 In., Wire Dia. 0.080 In., Load (Lbs.) 21.38, Deflection @ Load 0.16 In., Spring Rate (Lbs./In.) 70.2, Meets/Exceeds ASTM A227 more

ZORO SELECT 53620 2 U-Bolt with Mounting Plates, 1/4"-20, 1 1/8 in Wd, 2 in Ht,

Standard U-Bolt with Mounting Plate, U-Bolt with Mounting Plates, Steel, Finish Hot Dipped Galvanized, Thread Size 1/4 In.-20, Thread Length 1 in, Inside Length 2 in, Inside Width 1 1/8 in, Pipe Size (In.) 3/4 in, Characteristics Has Coarse Rolled... more

ZORO SELECT U17243.037.0200 Round U-Bolt, 3/8"-16, 2 1/2 in Wd, 3 1/8 in Ht,

Standard U-Bolt, Standard U-Bolt, Steel, Finish Zinc Plated, Thread Size 3/8 In.-16, Thread Length 1 1/4 in, Inside Length 3 1/8 in, Inside Width 2 1/2 in, Pipe Size (In.) 2 in, Characteristics ASME B18.2.2- ASTM A563, Grade A, Includes (2) Nuts,... more

ZORO SELECT 2MDH8 Universal Latch Guard, Aluminum, Steel, 11-3/4"L x 3-1/2"W

Door Latch Guard, Length 11 3/4 in, Width 3 1/2 in, Aluminum-Plated Finish, Material Steel, For Use With Door Type Exterior Door, Hardware Included, For Use With Fits Deadbolts, And Door Locks Up To 3 1/2 in dia more

ZORO SELECT U17272.050.0300 Round U-Bolt, 1/2"-13, 3 9/16 in Wd, 5 3/4 in Ht,

Standard U-Bolt, Standard U-Bolt, Steel, Finish Plain, Thread Size 1/2 In.-13, Thread Length 3 in, Inside Length 5 3/4 in, Inside Width 3 9/16 in, Pipe Size (In.) 3 in, Characteristics ASME B18.2.2- ASTM A563, Grade A, Includes (4) Nuts, Package... more

ZORO SELECT U17277.050.0300 Round U-Bolt, 1/2"-13, 3 9/16 in Wd, 5 3/4 in Ht,

Standard U-Bolt, Standard U-Bolt, 304 Stainless Steel, Finish Plain, Thread Size 1/2 In.-13, Thread Length 3 in, Inside Length 5 3/4 in, Inside Width 3 9/16 in, Pipe Size (In.) 3 in, Characteristics Has Coarse Rolled Threads, for Steel or Wrought Iron... more

SUP-R STUD 2614314 SUP-R STUD Wedge Anchor, 1/4" Dia., 3-1/4" L, Steel Zinc

Wedge Anchor, System of Measurement Inch, Anchor Diameter 1/4 in, Thread Size 1/4 In.-20, Overall Length 3 1/4 in, Thread Length 2 1/4 in, Eyelet Hole Size Not Applicable, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, Compatible... more

ZORO SELECT U70411.025.0325 Wedge Anchor, 1/4" Dia., 3-1/4" L, Carbon Steel

Wedge Anchor, System of Measurement Inch, Anchor Diameter 1/4 in, Thread Size 1/4 In.-20, Overall Length 3 1/4 in, Thread Length 2 1/8 in, Material Steel, Material Grade/Class Not Graded, Finish Zinc Plated, Compatible Material Concrete, Drill Bit Size... more

ZORO SELECT 5LY90 Barrel Bolt, #10-24, 1 1/2 in Brl Lg, 1/4 in Brl Dia, Steel

Barrel Bolt, Finish Zinc Plated, Material Steel, Barrel Head Style Truss, Barrel Drive Type Combination Slotted/Phillips, Thread Size #10-24, Barrel Length 1 1/2 in, Barrel Diameter 1/4 in, Barrel Thread Depth 3/8 in, Barrel Head Diameter 7/16 in,... more

ZORO SELECT 2FE35 Grade 5, 1/2"-13 Flange Bolt, Zinc Plated Steel, 1-1/4 in L,

Flange Bolts, Dimensional Standards ASME B18.2.1, Drive Hex, Drive Size 1/2 in, Fastener Length 1 1/4 in, Finish Zinc Plated, Flange Diameter 1 5/64 in, Flange Type Serrated, Head Height 1/2 in, Head Width 3/4 in, Manufacturer Location Globally... more

ZORO SELECT U08280.050.0350 Lag Screw, 1/2 in, 3-1/2 in, Steel, Zinc Plated Hex

Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 1/2 In., Fastener Length 3 1/2 in, Threads per Inch 6, Thread Style Partially Threaded, Minimum Thread Length 2 1/4 in, Dimensional Standards ASME B18.2.1, Pack Size Small, System of... more

ZORO SELECT U17380.000.0350 S Hook,1/2 in. Opening,3-1/2 in.,PK10

S Hook, Material Steel, Finish Zinc, Wire Dia. 0.373 In., Hook Eye Inside H 1 In., Hook Eye Inside W 1 In., Opening Size 1/2 In., Width 1-3/4 In., Overall Length 3-1/2 In., Working Load Limit 160 lb., Package Quantity 10 more

WESTWARD 4FPU9 Flame Inspection Mirror,9 3/4-28 1/2 In

Flame Inspection Mirror, Base Type Standard, Compressed Length 9 3/4 in, Extended Length - Maximum 29 1/2 in, Handle Material Rubber, Handle Style Straight, Included Wheels Wheels Not Included, Magnification Not Applicable, Mirror Adjustment - Maximum... more

ZORO SELECT U08280.037.0125 Lag Screw, 3/8 in, 1-1/4 in, Steel, Zinc Plated Hex

Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 3/8 In., Fastener Length 1 1/4 in, Threads per Inch 7, Thread Style Fully Threaded, Dimensional Standards ASME B18.2.1, Pack Size Small, System of Measurement Inch, Drive External Hex,... more

ZORO SELECT 1LAH1 Hex Weld Nut, 1/4"-20, Steel, 1/2 in Wd, 5/64 in Ht, 50 PK

Weld Nut, Material Steel, Finish Black Oxide, Thread Size 1/4 In.-20, Base Height 5/64 in, Base Width 1/2 in, Collar Height 0.4 in, Number of Weld Projections 3, System of Measurement Inch, Base Shape Hex, For Hole Diameter 27/64 in, Pack Size Small... more

ZORO SELECT 5MB84 Partition Bolt, #10-24, 1/2 in Brl Lg, 1/4 in Brl Dia, 18-8

Partition Bolt, Material 18-8 Stainless Steel, Barrel Head Style Truss, Screw Head Style Truss, Thread Size #10-24, Barrel Length 1/2 in, Barrel Diameter 1/4 in, Barrel Thread Depth 1/2 in, Barrel Drive Type One-Way, Screw Length 3/4 in, Screw Drive... more

MKT FASTENING 6204000 Double Lag Shield, 1/2" Dia, 1-3/8" L, Alloy Steel Plain,

Double Expansion Anchor, Anchor Diameter 1/2 in, Overall Length 1 3/8 in, Screw Size 1/4 in, Thread Size 1/4 In.-20, Thread Depth 1.375 in, Thread Type Coarse, Material Zinc Alloy, Finish Plain, Drill Bit Size 1/2 in, Minimum Installation Depth 1 3/8... more

ULLMAN HTE-2LT Inspection Mirror,LED,1-3/8x 6-1/2 to 35

Inspection Mirror, Base Type Lighted, Compressed Length 8 3/4 in, Extended Length - Maximum 35 7/8 in, Handle Material Rubber, Handle Style Knurled, Included Wheels Wheels Not Included, Magnification Not Applicable, Mirror Adjustment - Maximum 360... more

BUNTING BEARINGS CB081212 Sleeve Bearing,I.D. 1/2,L 1-1/2,PK3

Sleeve Bearing, Bore Diameter 1/2 in, Bronze Material Type Cast Bronze, Flange Diameter Not Applicable, Flange Type Non-Flanged, Material Group Metallic, Maximum Temperature 500 Degrees F, Minimum Temperature -450 Degrees F, Outside Diameter 3/4 in,... more

ZORO SELECT U34142.025.0088 Blind Rivet, Dome Head, 1/4 in Dia., 3/4 in L,

Blind Rivet, System of Measurement Inch, Overall Length 2 5/64 in, Body Length 3/4 in, Shank Diameter 0.25 in, Product Type Blind Rivet, Body Material Stainless Steel, Finish Plain, Head Type Dome, Head Diameter 1/2 in, Head Angle 90 Degrees , Shear... more

ZORO SELECT 822500G Grade 8, 1/4"-20 Flange Bolt, Plain Steel, 3/4 in L, 100 PK

Flange Bolts, Dimensional Standards ASME B18.2.1, Drive Hex, Drive Size 1/4 in, Fastener Length 3/4 in, Finish Black Oxide, Flange Diameter 9/16 in, Flange Type Standard, Head Height 9/32 in, Head Width 3/8 in, Manufacturer Location Globally Sourced,... more

ZORO SELECT 9559PK Push-In Rivet, Dome Head, 1/4 in Dia., 3/4 in L, Nylon Body,

Nylon Retainers, System of Measurement Inch, Shank Diameter 0.25 in, Overall Length 13/16 in, Shank Type Keyhole, Material Nylon, Head Type Dome, Head Height 0.063 in, Head Diameter 1/2 in, Color Black, Maximum Hole Diameter 0.25 in, Product Type... more

ZORO SELECT 310-002938 Carbide Bur,End Cut,1/4 In,1/4 Shank

Carbide Bur, End Type Cut, Cut Type Double, Shank Dia. 1/4 in, Head Dia. 1/4 in, Head Length 1 in, Included Angle Not Applicable, Overall Length 2 3/4 in, Trade Number SB-1L, Primary Material Application Brass, Bronze, Carbon Steel, Cast Iron, Copper,... more

ZORO SELECT U37025.175.0001 Split Lock Washer, For Screw Size 1-3/4 in Steel,

Split Lock Washer, Lock Washer Type Split Lock, Finish Hot Dipped Galvanized, Material Steel, For Screw Size 1 3/4 in, Inside Diameter 1.758 in, Outside Diameter 2.679 in, Maximum Thickness 0.389 in, Minimum Thickness 0.389 in, Dimensional Standards... more

ZORO SELECT 6DYW7 Flat Washer, For Screw Size 1 3/4" ,Steel Zinc Plated Finish,

USS Washer, Flat Washer Type USS, Dimensional Standards ASME B18.22.1 Type A Wide, USS Standard, Material Steel, Material Grade/Class Grade 2, Finish Zinc Plated, For Screw Size 1 3/4 in, Inside Diameter 1.875 in, Outside Diameter 4 in, Maximum... more

S & W NSSWD-2 Level Mount,Swivel Stud,1/2-13,1-7/8 in.

Leveling Mount, Leveling Mount Type Swiveling Stud, Base Dia. 1.88 in, Height 3.25 in, Load Capacity 700 lb, Thread Size 1/2 In.-13, Construction Stainless Steel, Hex 3/4 in, Includes Locking Nut, Bolt Length 2 in, Finish Stainless Steel, Base Material... more

ZORO SELECT U08280.025.0300 Lag Screw, 1/4 in, 3 in, Steel, Zinc Plated Hex

Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 1/4 In., Fastener Length 3 in, Threads per Inch 10, Thread Style Partially Threaded, Minimum Thread Length 1 51/64 in, Dimensional Standards ASME B18.2.1, Pack Size Small, System of... more

ZORO SELECT U24522.016.0175 #8-32 x 1-3/4 in Phillips Pan Machine Screw, Zinc

Machine Screw, Head Type Pan, Material Steel, Finish Zinc Plated, Drive Phillips, Thread Size #8-32, Fastener Length 1 3/4 in, Head Width 0.312 in, Head Height 0.322 in, Drive Size #2, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.6.3,... more

ZORO SELECT U08320.037.0225 Carriage Bolt,3/8-16x2 1/4 L,Pk50

Carriage Bolt, Inch, Neck Type Square, Basic Material Steel, Material Grade Grade 5, Fastener Finish Zinc Plated, Dia./Thread Size 3/8 In.-16, Fastener Length 2 1/4 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), ASME... more

ZORO SELECT 5XA17 Key Locking Insert, Thin Wall, 2 Keys Keys, 1/4"-20 Int Thrd

Key Locking Thread Insert, System of Measurement Inch, Insert Diameter 3/8 in, Overall Length 3/8 in, Internal Thread Size 1/4 In.-20, Internal Thread Fit 3B, External Thread Size 3/8 In.-16, External Thread Fit 2A, Thread Direction Right Hand, Thread... more

ZORO SELECT U01036.043.0225 Square Neck Plow Bolt, 7/16"-14 Thrd Sz, 2 1/4 in

Inch, Plow Bolt, #3 Flat Head Type, Carbon Steel, Material Grade Grade 5, Plain Fastener Finish, Dia./Thread Size 7/16 In.-14, Fastener Length 2 1/4 in, Fastener Thread Direction Right Hand, Fastener Thread Type UNC (Coarse), Fastener Industry... more

ZORO SELECT U48170.011.0050 #4-40 x 1/2 in Slotted Flat Machine Screw, Plain

Machine Screw, Head Type Flat, Material Brass, Finish Plain, Drive Slotted, Thread Size #4-40, Fastener Length 1/2 in, Head Width 0.212 in, Head Height 0.067 in, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.6.3, Pack Size Small, Type... more

ZORO SELECT 5MA66 Binding Barrel, #8-32, 2 1/4 in Brl Lg, 13/64 in Brl Dia,

Binding Post, Material Aluminum, Barrel Head Style Rivet, Screw Head Style Truss, Thread Size #8-32, Barrel Length 2 1/4 in, Barrel Diameter 13/64 in, Barrel Thread Depth 3/8 in, Barrel Drive Type No Drive, Screw Length 1/4 in, Screw Drive Style... more

ZORO SELECT U24212.025.0200 1/4"-20 x 2 in Combination Phillips/Slotted Round

Machine Screw, Head Type Round, Material Steel, Finish Zinc Plated, Drive Combination Slotted/Phillips, Thread Size 1/4 In.-20, Fastener Length 2 in, Head Width 0.477 in, Head Height 0.175 in, Drive Size #3, Tensile Strength 60,000 psi, Dimensional... more