Plumbing Supplies › tru flate 21 467 3

5 PK Tru-Flate 21-143-Tru-Flate 3/8 In. Barb 1/4 In. MNPT Brass Hose End

All brass - will not rust or corrode. Use with hose clamps or ferrules. 1 per card.; more

SPEEDAIRE 30E743 Coupler Body,(F)NPT,3/8,Steel

Quick Connect Hose Coupling, Tru-Flate-Automotive, Steel, Socket, Female, NPT, Coupling Size 3/8 in more

PARKER 2E Coupler Plug,Steel,MNPT,3/8 In. Pipe

Quick Connect Hose Coupling, Tru-Flate-Automotive, Steel, Plug, Male, NPT, Coupling Size 3/8 in more

PARKER 3E Coupler Plug,Steel,FNPT,3/8 In. Pipe

Quick Connect Hose Coupling, Tru-Flate-Automotive, Steel, Plug, Female, NPT, Coupling Size 3/8 in more

5 PK Tru-Flate 21-555-Tru-Flate 1/8 In. NPT Air Line Drain Cock

For use in low pressure applications. Hand-tightening provides leak-proof seal. All brass corrosion resistant material.; more

5 PK Tru-Flate 21-123-Tru-Flate 1/4 In. Barb 1/4 In. MNPT Brass Hose End

All brass - will not rust or corrode. Use with hose clamps or ferrules. 1 per card.; more

5 PK Tru-Flate 21-133-Tru-Flate 5/16 In. Barb 1/4 In. MNPT Brass Hose End

All brass - will not rust or corrode. Use with hose clamps or ferrules. 1 per card.; more

2 PK Tru-Flate 21-557-Tru-Flate 1/4 In. NPT Air Line Drain Cock

For use in low pressure applications. Hand-tightening provides leak-proof seal. All brass corrosion resistant material.; more

1 PK Tru-Flate 13-527-Tru-Flate Industrial/Milton Series Push-to-Connect 3/8 In. MNPT Coupler

Air line coupler features 100% air-tight seal accidental disconnect protection and tubular valve construction which promotes greater air flow.; more

2 PK Tru-Flate 12-227-Tru-Flate Industrial/Milton 3/8 In. MNPT Steel Industrial Plug

Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.; more

2 PK Tru-Flate 12-527-Tru-Flate Industrial/Milton 3/8 In. MNPT Steel Industrial Plug

Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. Conforms to ANSI (NFPA)... more

2 PK Tru-Flate 12-537-Tru-Flate Industrial/Milton 3/8 In. FNPT Steel Industrial Plug

Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. Conforms to ANSI (NFPA)... more

1 PK Tru-Flate 13-227-Tru-Flate Industrial/Milton Series Push-to-Connect 3/8 In. MNPT Coupler

Air line coupler features 100% air-tight seal accidental disconnect protection and tubular valve construction which promotes greater air flow.; more

2 PK Tru-Flate 12-237-Tru-Flate Industrial/Milton 3/8 In. FNPT Steel Industrial Plug

Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.; more

(case of 2) Tru Flate 21-242 Hose Fitting Female 3/8 By 1/4 Inch

Key Features All brass resists rust and will not corrode as easily as other material Precision machined to high quality standard Use with hose clamp or ferrule Air hose fittings barb type - female tru-flate hose id x npt inches=3/8 x 1/4 All brass... more

5 PK Tru-Flate 12-225-Tru-Flate Industrial/Milton 1/4 In. MNPT Steel Industrial Plug

Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.; more

(case of 2) Tru Flate 21-143 Hose Fitting Male 3/8 By 1/4 Inch

Key Features All brass resists rust and will not corrode as easily as other material Precision machined to high quality standard Use with hose clamp or ferrule Air hose fittings barb type - male tru-flate carded hose id x npt inches=3/8 x 1/4 All brass... more

5 PK Tru-Flate 12-235-Tru-Flate Industrial/Milton 1/4 In. FNPT Steel Industrial Plug

Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions.; more

2 PK Tru-Flate 41-303-Tru-Flate Hose Repair Kit ( 5-Pieces)

Contains all parts necessary to repair a 1/4 In. direct air line hose. Kit contains: (1) 1/4 In. ID x 1/4 In. MNPT male hose fitting (1) 1/4 In. ID hose splicer and (3) 3/8 In. ID hose clamps.; more

1 PK Tru-Flate 41-125-Tru-Flate 1/4 In. NPT 1/4 In. NPT Manifold

3-in-1 air line manifold. Supply 3 air tools from 1 source. Use on air hose end or as permanently fixed bench outlet. No need to disconnect/connect to use different tool. Three 1/4 NPT outlets and single 1/4 NPT inlet make this a useful shop or bench... more

Tru-Flate 21-601 1/4 NPT Male Fitting x 1/4 ID Hose Barb Air Line Swivel Fitting

Eliminates kinked and twisted air line hose by swiveling a full 360 degree. Use on air lines tools and compressor connections to increase flexibility and convenience. Barb type and male and female connections. Brand Name: Tru-Flate Material: Brass... more

(case of 2) Tru Flate 21-423 Hose Splicers Carded Hose 1/4 Inch

Air line hose splicer barb type tru-flate carded hose i.d. 1/4 inch All brass construction resists rust and will not corrode as easily as other materials. Precision machined to high quality standards. Use with hose clamp or ferrules. All brass... more

Tru-Flate 21-423 1/4 Hose ID Hose Splicer

Tru-Flate 21-423 1/4 Hose ID Hose Splicer Hose fittings connect control change the direction of and terminate the flow in piping and hose systems. They are made of brass stainless steel galvanized steel and other materials that resist corrosion... more

(case of 2) Tru Flate 21-222 Hose Fitting Female 1/4 By 1/4 Inch

Key Features All brass resists rust and will not corrode as easily as other material Precision machined to high quality standard Use with hose clamp or ferrule Air hose fittings barb type - female tru-flate hose id x npt inches=1/4 x 1/4 All brass... more

Tru-Flate 21-423 1/4 ID Hose Splicer Barb Type Hose Fitting

Hose fittings connect control change the direction of and terminate the flow in piping and hose systems. They are made of brass stainless steel galvanized steel and other materials that resist corrosion pressure and wear. Hose fittings have various... more

Tru-Flate 21-133 5/16 Male Hose End Barb Type Hose Fitting

This Tru-Flate 21-133 hose adapter is made of brass and has a 1/4 male end for connecting to threaded pipe conforming to National Pipe Thread NPT standard and a barbed fitting for a hose with a 5/16 inside diameter. This adapter is for a fixed... more

Tru-Flate 21-123 1/4 Male Hose End Barb Type Hose Fitting

This Tru-Flate 21-123 h air line fitting is suitable for connecting supply line hoses to a plug air tool or other air operated machinery. It is made of brass for resistance to corrosion. It has a 1/4 barbed end for connecting to a hose and a 1/4 inch... more

Tru-Flate 12-537 3/8 I/M Design x 3/8 FNPT Steel Plug

PLUG CP26 STL 38 IM 38FPT more

Tru-Flate 13-537 3/8 Female NPT Coupler

The Tru-Flate 13-537 3/8 Female NPT Coupler is a versatile and essential component used in compressed air systems. It is designed to provide a secure and leak-free connection between two air hoses or fittings with male NPT (National Pipe Thread) ends.... more

1 Pc Tru-Flate Brass Hose Splicer 3/8 1 Pc

Brand Name: Tru-Flate *Design: *Fitting Style: *Material: Brass *Maximum Pressure: *Number in Package: 1 *Product Type: Hose Splicer *Sub Brand: *Height: *Usage: *Air Inlet Size - End 1: 3/8 *Air Inlet Size - End 2: *Nozzle Type - End 1: *Nozzle Type -... more

Tru-Flate Industrial/Milton 3/8 In. FNPT Steel Industrial Plug 12-237

Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. WARNING: Handling this... more

Tru-Flate 12527 Air Quick Male Plug 3/8 Each

TRU-FLATE MALE PLUG 3/8 NPT 100% air tight seal Industrial/Milton design Brass Carded. WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive... more

Tru Flate 13-537 3/8 Inch Female Air Line Coupler

Air hose couplers industrial/milton design standard sleeve 3/8 inches body series carded female npt 3/8 inches Couplers are intended for use on compressed air lines only. All have maximum rated working pressure of 300 PSI. This plug design has been... more

1 Pc Tru-Flate Steel 1/4 In. I/M Style Plug 3/8 In. Male 1 Pc

Brand Name: Tru-Flate *Design: 1/4 in. I/M Style *Fitting Style: *Material: Steel *Maximum Pressure: *Number in Package: 1 *Product Type: Plug *Sub Brand: *Height: *Usage: *Air Inlet Size - End 1: 3/8 *Air Inlet Size - End 2: *Nozzle Type - End 1: Male... more

2PACK Tru-Flate Industrial/Milton 3/8 In. FNPT Steel Industrial Plug

Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. Conforms to ANSI (NFPA)... more

2PACK Tru-Flate 3/8 In. MNPT T-Style Steel Plug

Tru-Flate T-Style design coupler plug is wider than other interchanges. Widest metal section between the groove and pilot. more

2PACK Tru-Flate Industrial/Milton 3/8 In. FNPT Steel Industrial Plug

Industrial Milton design coupler plug. This plug design is considered the industrial standard. Can be identified by the 3/16 In. pilot and flat bottom V-shaped ball groove. Conforms to ANSI (NFPA) T3.20.14-1990 dimensions. more

2PACK Tru-Flate 3/8 In. Brass Hose Splicer

Splicer has a Barb type hose and is precision machined to high quality standards. Constructed of brass to resist rust and corrosion. more