homemaxs 10 pcs 8 5

Starrett 5/32" Center Punch - #264e 5/32" Center Punch

Stakes socket-head cap screws securing the bolt carrier key to the bolt carrier. Mfg: Starrett SPECS: 4" (10.2cm) long. 5⁄32" (4mm) punch, 3⁄8" diameter body. more

Plow & Hearth Triple Battery Window Candle | 10 H x 8.75 W x 2.5 D in | Wayfair 87017 AG

Place these battery-operated triple candles anywhere, then set the timer with a twist of the bulb. They'll turn on automatically for 8 hours and off for 16. There's no photo sensor requiring window lighting and no messy electrical cords. Cool,... more

3M EPS300-3/8-6"-BLACK-10-10 PC PKS Shrink Tubing,0.375in ID,Black,6in,PK10

Heat Shrink Tubing, Thin Wall, Material Polyolefin with Adhesive, Flexible, Flame Retardant Yes, Adhesive Lined Yes, Shrink Ratio 3:1, Use With Wire Size 12 AWG to 8 AWG, I.D. Before Shrinking 0.38 in, I.D. After Shrinking 0.12 in, Wall Thickness After... more

4-8/5-9/5-10/6-10/8-12mm HSS Twist Step Drill Bit Pocket Hole Drill Bits;4-8/5-9/5-10/6-10/8-12mm HSS Twist Step Drill Bit Pocket Hole Drill Bits

Features: - High speed steel hard and sharp. - Removed Chip fast drilling hole fast. - Can open two holes at a time easy to work. - Drilling steady high efficiency hole wall is smooth and chip evacuation unobstructed. - Dedicated to open the sliding... more

RITTAL JB121006HC Carbon Steel Enclosure, 11.8 in H, 10 in W, 5.9 in D, 12, 3R,

Enclosure NEMA Rating 12, 3R, 4, Material of Enclosure Carbon Steel, 10 in, Hinged Enclosure Cover Type, Solid / Clear Cover Solid, Closure Method 1/4 Turn Latch, Finish Powder Coated, Color Light Gray, Depth 5.9 in, Enclosure Cover Features 180... more

ZORO SELECT FS-500SS ST4 120.00 Superstrut Channel,1-5/8" W,10 ft. L,Silver

Strut Channel - Slotted, Slot Type Slotted, Size 1 5/8 in x 13/16 in, Slot Length 1 1/8 in, Slot Width 9/16 in, Overall Length 10 ft, Overall Height 13/16 in, Overall Width 1 5/8 in, 304 Stainless Steel, Gauge 14 ga, Hole Size 9/16 in x 1 1/8 in, Load... more

4-8/5-9/5-10/6-10/8-12mm HSS Twist Step Drill Bit Pocket Hole Drill Bits;4-8/5-9/5-10/6-10/8-12mm HSS Twist Step Drill Bit Pocket Hole Drill Bits

Features: - High speed steel hard and sharp. - Removed Chip fast drilling hole fast. - Can open two holes at a time easy to work. - Drilling steady high efficiency hole wall is smooth and chip evacuation unobstructed. - Dedicated to open the sliding... more

4-8/5-9/5-10/6-10/8-12mm HSS Twist Step Drill Bit Pocket Hole Drill Bits;4-8/5-9/5-10/6-10/8-12mm HSS Twist Step Drill Bit Pocket Hole Drill Bits

Features: - High speed steel hard and sharp. - Removed Chip fast drilling hole fast. - Can open two holes at a time easy to work. - Drilling steady high efficiency hole wall is smooth and chip evacuation unobstructed. - Dedicated to open the sliding... more

4-8/5-9/5-10/6-10/8-12mm HSS Twist Step Drill Bit Pocket Hole Drill Bits;4-8/5-9/5-10/6-10/8-12mm HSS Twist Step Drill Bit Pocket Hole Drill Bits

Features: - High speed steel hard and sharp. - Removed Chip fast drilling hole fast. - Can open two holes at a time easy to work. - Drilling steady high efficiency hole wall is smooth and chip evacuation unobstructed. - Dedicated to open the sliding... more

3M EPS300-1/2-6"-BLACK-10-10 PC PKS Shrink Tubing,0.5in ID,Black,6in,PK10

Heat Shrink Tubing, Thin Wall, Material Polyolefin with Adhesive, Flexible, Flame Retardant Yes, Adhesive Lined Yes, Shrink Ratio 3:1, Use With Wire Size 6 AWG to 1 AWG, I.D. Before Shrinking 0.5 in, I.D. After Shrinking 0.16 in, Wall Thickness After... more

TEMO 16 pc Rubber Polishing Burr 4 6 8 10 mm (5/32 1/4 5/16 3/8 Inch) Bullet Cylinder with 3 mm (1/8 Inch) Shank for Dremel and Compatible

TEMO 16 pc Rubber Polishing Burr 4 6 8 10 mm (5/32 1/4 5/16 3/8 Inch) Bullet Cylinder with 3 mm (1/8 Inch) Shank for Dremel and Compatible more

Accusize 10 Pcs 1/8 by 3/8 by 3/8 2-5/16 Oal 4 Flute M42-8% Cobalt Finishing Center Cutting End Mill Co-18x10

Welcome to Accusize. As a Canadian distributor of machine tooling we supply high quality tools for cutting drilling measuring as well as machine tool accessories at competitive prices from Toronto Canada. We pride ourselves on honesty and getting to... more

Homemaxs 10 pcs Eagle Shape Flag Pole Top Decoration Outdoor Flag Pole Finial Ornament

Description Wanna buy a practical flag pole top ornament? Here comes our flag pole top ornament for you to choose. Simple structure design helps make it convenient to use. This flag pole top ornament is made of premium plastic material durable and long... more

10 Pcs High-Speed Steel End Mills Square Nose Double End Bright (Uncoated) Finish 5/8 Mill Diameter 1 3/8 Length Of Cut 5 Overall Length 4 Flute Center Cutting

5/8 Cut Diameter; 1 3/8 Length of Cut; 5 Overall Length; 5/8 Shank Diameter; 4 Flute; 35° Helix Angle General purpose end mill that creates square corners; Used for both roughing and finishing applications High-Speed Steel; Excellent toughness wear... more

Accusize 10 Pcs 1/4 by 3/8 by 5/8 2-7/16 Oal 4 Flute M42-8% Cobalt Finishing Center Cutting End Mill Co-14x10

4 Flute Diameter: 1/4 Shank Diameter: 3/8 Flute length: 5/8 Overall Length: 2-7/16 M42-8% Premium cobalt Center cutting Flutes ground by a world-class IS-9002 factory CNC Qualified more

SCHNEIDER ELECTRIC LR2K0316 Ovrload Rely,8 to 11.5A,Class 10,NEMA 10

Overload Relay, Auxiliary Contact Form 1NO/1NC, Maximum Overload Relay Current Setting 11.5 A, Minimum Overload Relay Current Setting 8 A, Trip Class 10A, Maximum Voltage Rating 250V DC (Signaling Circuit), 690V AC (Signaling Circuit), NEMA Size Not... more

Accusize 5 Pcs 5/8 by 5/8 by 1-5/8 3-3/4 Oal 4 Flute M42-8% Cobalt End Mill Finishing Center Cutting Co-58x5

4 Flute Diameter: 5/8 Shank Diameter: 5/8 Flute length: 1-5/8 Overall Length: 3-3/4 M42-8% Premium cobalt Center cutting Flutes ground by a world-class IS-9002 factory CNC Qualified more

3M ITCSN-1500-12"-BLACK-10 PCS Shrink Tubing,1.5in ID,Black,12in,PK10

Heat Shrink Tubing, Heavy Wall, Material Cross-Linked Polyolefin with Adhesive, Rigid, Flame Retardant No, Adhesive Lined Yes, Shrink Ratio 3:1, Use With Wire Size 3/0 AWG to 400 MCM, I.D. Before Shrinking 1.5 in, I.D. After Shrinking 0.5 in, Wall... more

7 Pcs Wirewound Cement Resistor 5 Pcs 10W 1.0 Ohm & 2 Pcs 20W 8 Ohm

Color: White Product Name: Cement Resistor Tolerance: +/-5% (J); 1.0 Ohm Cement Resistor: Body Material: Cement Power: 10W; Resistance: 1.0 Ohm Body Size (.): 48 x 10 x 10mm/1.9 inch x 0.4 inch x 0.4 inch (L * W * H) Lead Diameter(.): 0.8mm/0.031 inch... more

7 Pcs Wirewound Cement Resistor 5 Pcs 10W 1.0 Ohm & 2 Pcs 20W 8 Ohm

7 pcs Cement Resistor: 5 pcs 1.0 Ohm & 2 pcs 8 Ohm Cement Resistor features good heat resistant low temperature coefficient high load power high insulating capacity. Widely used in computer TV set apparatus meter sound and other equipment. Wire Wound... more

DRILAX 30 pcs SET of 3 Different Sizes : 10 pcs. Of 1mm 10pcs. Of 2mm 10 pcs. Of 3mm Diamond Drill Bit Cylindrical Burr Kit Jewelry Beach Sea Glass Shells Gemstones Lapidary Shank : 1/8 Inch

Set of 30 pcs. Assorted Mixed 1mm 2mm 3mm 10 ea. Diamond Drill Bits - 1/8 shank Fits drills flex shafts and is compatible with dremels. Used by Jewelry Designers for drilling clean holes Drills Beach Sea Glass Sea Shells Rocks Marbles etc. more

5 Pcs 3mm Solid Carbide Endmills Endmill D3X8XD4X50L & 10 Pcs CNC Router Bits 1/8 Inch Spiral Upcut Router Bit

Endmill: 1.Made of high quality carbide it is high-wearable and has a . You can decrease the of changing save production time. 2.Carbide end mills better rigidity and can be run faster than other material end mills. 3.4 end mill can be used on many... more

5 Pcs 3mm Solid Carbide Endmills Endmill D3X8XD4X50L & 10 Pcs CNC Router Bits 1/8 Inch Spiral Upcut Router Bit

Endmill: 1.Made of high quality carbide it is high-wearable and has a . You can decrease the of changing save production time. 2.Carbide end mills better rigidity and can be run faster than other material end mills. 3.4 end mill can be used on many... more

10 Pc Crescent Nailslicer 6-1/2 In. D X 5/8 In. Framing Carbide Circular Saw Blade 24 Teeth 10 Pk

Grind: *Hook Angle: *Kerf: *Maximum Speed: *Number in Package: 10 *Number of Teeth: 24 *Packaging Type: Boxed *Product Type: Circular Saw Blade *Sub Brand: NailSlicer *Brand Name: Crescent *Compatibility: Universal Fit *Arbor Size: 5/8 *Arbor Type:... more

TEMO 10 pc 8 mm (5/16 Inch) Bullet Blue Mounted Stone Point Grinding Abrasive Set 1/8 Inch (3 mm) Shank for Dremel and Compatible Rotary Tool

TEMO 10 pc 8 mm (5/16 Inch) Bullet Blue Mounted Stone Point Grinding Abrasive Set 1/8 Inch (3 mm) Shank for Dremel and Compatible Rotary Tool more

TEMO 10 pc 8 mm (5/16 Inch) Bullet Pink Aluminum Oxide Mounted Stone Point Grinding Abrasive 1/8 Inch (3 mm) Shank for Dremel and Compatible Rotary Tool

TEMO 10 pc 8 mm (5/16 Inch) Bullet Pink Aluminum Oxide Mounted Stone Point Grinding Abrasive 1/8 Inch (3 mm) Shank for Dremel and Compatible Rotary Tool more

10 Pcs M42 Cobalt Roughing End Mills Square Nose Coarse Pitch Bright (Uncoated) Finish 5/16 Mill Diameter 1-3/8 Length Of Cut 3-1/8 Overall Length 4 Flute Center Cutting

5/16 Cut Diameter; 1-3/8 Length of Cut; 3-1/8 Overall Length; 3/8 Shank Diameter; 4 Flute; 35° Helix Angle; Coarse Pitch High-performance end mill capable of high material removal rates; Coarse pitch creates larger chips making it ideal for use on... more

Accusize 10 Pcs 5/16 by 3/8 by 3/4 2-1/2 Oal 4 Flute M42-8% Cobalt Finishing Center Cutting End Mill Co-516x10

Welcome to Accusize. As a Canadian distributor of machine tooling we supply high quality tools for cutting drilling measuring as well as machine tool accessories at competitive prices from Toronto Canada. We pride ourselves on honesty and getting to... more

TEMO 10 pc 8 mm (5/16 Inch) Bullet Rubber Rotary Tool Polishing Burr with 3 mm (1/8 Inch) Shank for Dremel and Compatible

TEMO 10 pc 8 mm (5/16 Inch) Bullet Rubber Rotary Tool Polishing Burr with 3 mm (1/8 Inch) Shank for Dremel and Compatible more

TEMO 10 pc 8 mm (5/16 Inch) Cylinder Rubber Rotary Tool Polishing Burr with 3 mm (1/8 Inch) Shank for Dremel and Compatible

TEMO 10 pc 8 mm (5/16 Inch) Cylinder Rubber Rotary Tool Polishing Burr with 3 mm (1/8 Inch) Shank for Dremel and Compatible more

10 Pcs High-Speed Steel End Mills Square Nose Double End Bright (Uncoated) Finish 1/4 Mill Dia. 5/8 Loc 3-3/8 OAL 4 Flute Center Cutting

Thank you for your custom.Customer care is our top priority. Offer is subject to availability.We promise you won t regret buying it. 1/4 Cut Diameter; 5/8 Length of Cut; 3-3/8 Overall Length; 3/8 Shank Diameter; 4 Flute; 35° Helix Angle General... more

10 Pcs High-Speed Steel End Mills Square Nose Bright (Uncoated) Finish 3/4 Mill Diameter 1-5/8 Length Of Cut 3-7/8 Overall Length 4 Flute Center Cutting

3/4 Cut Diameter; 1-5/8 Length of Cut; 3-7/8 Overall Length; 3/4 Shank Diameter; 4 Flute; 35° Helix Angle General purpose end mill that creates square corners; Used for both roughing and finishing applications High-Speed Steel; Excellent toughness... more

10 Pcs High-Speed Steel End Mills Square Nose Bright (Uncoated) Finish 1/8 Mill Dia. 3/8 Loc 2-5/16 OAL 4 Flute Center Cutting

1/8 Cut Diameter; 3/8 Length of Cut; 2-5/16 Overall Length; 3/8 Shank Diameter; 4 Flute; 35° Helix Angle General purpose end mill that creates square corners; Used for both roughing and finishing applications High-Speed Steel; Excellent toughness wear... more

SCHNEIDER ELECTRIC LR2K0314 Ovrload Rely,5.50 to 8A,Class 10,NEMA 10

Overload Relay, Auxiliary Contact Form 1NO/1NC, Maximum Overload Relay Current Setting 8 A, Minimum Overload Relay Current Setting 5.5 A, Trip Class 10A, Maximum Voltage Rating 250V DC (Signaling Circuit), 690V AC (Signaling Circuit), NEMA Size Not... more

ZORO SELECT FS-200 PG 120.00 Superstrut Channel,1-5/8" W,10 ft. L,Silver

Strut Channel - Solid Wall, Slot Type Solid, Size 1 5/8 in x 1 5/8 in, Overall Length 10 ft, Overall Height 1 5/8 in, Overall Width 1 5/8 in, Steel, Gauge 12 ga, Hole Size No Holes, Load Capacity 330 lb, Hole Spacing No Holes, Style Single, Channel... more

ZORO SELECT FS-200SS ST4 120.00 Superstrut Channel,1-5/8" W,10 ft. L,Silver

Strut Channel - Slotted, Slot Type Slotted, Size 1 5/8 in x 1 5/8 in, Slot Length 1 1/8 in, Slot Width 9/16 in, Overall Length 10 ft, Overall Height 1 5/8 in, Overall Width 1 5/8 in, 304 Stainless Steel, Gauge 12 ga, Hole Size 9/16 in x 1 1/8 in, Load... more

8 Gauge 33 Inch X 4 Pcs Plus Special Package 10 Pcs 7 Holes Clip 20 Pcs Stay Wire Clips 10 Feet Of Springing Wire For All Upholstery Use Black

Thank you for your custom.Customer care is our top priority. Offer is subject to availability.We promise you won t regret buying it. Our spring spacing 1 apart. Most modern version spring spacing less than 2 CAN NOT USE C.S. Osborne & Co. Brand No.... more

5/8-11 x 10 Hex Head Cap Screws Alloy Steel Grade 8 Plain Finish (Quantity: 10 pcs) - Coarse Thread UNC Partially Threaded Length: 10 Inch Thread Size: 5/8 Inch

A cap screw made from medium carbon alloy stel and heat treated. Deisgned for use in high stress applications. more