Home Hardware › Steel › allied brass 1 1 2

1/2 -20 x 1 (FT) Fine Thread Grade 8 Hex Cap Screw (Bolt) - USA Alloy Steel Yellow Zinc Plated Pk 25

PRODUCT SPECIFICATIONS Part #: 0000-119400 Fastener Type: Hex Cap Screw (Bolt) - USA Size Description: 1/2 -20 x 1 (FT) Diameter/Nominal Size: 1/2 Length: 1 Thread Pitch: 20 Thread Pitch Type: Fine Thread Direction: Right Thread Coverage: Full System... more

#10 x 1-1/2 Zinc Plated Steel Slotted Hex Washer Head Sheet Metal Screws SMSHWS-074

Diameter: #10 Length: 1-1/2 Material: Steel Finish: Zinc Head Style: Hex Washer (Slotted|Hex) Thread Length: Full Type: Sheet Metal Screw Diameter 3: 13/32 A sheet metal screw has sharp threads that cut into a material such as sheet metal plastic wood... more

x 1 1/2 Dowel Pins / Sainless Steel 18-8 / Bright Finish (Quantity: 100 pcs)

0.093 (3/32 ) Length:1.500 (1-1/2 ) Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Stainless Steel 18-8 more

x 1 1/2 Dowel Pins/Alloy Steel/Bright Finish (Quantity: 100 pcs)

0.219 (7/32 ) Length:1.500 (1-1/2 ) This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Heat Treated... more

#10 x 1-1/2 Zinc Plated Steel Combo Pan Head Sheet Metal Screws

Diameter: #10 Length: 1-1/2 Material: Steel Finish: Zinc Head Style: Pan (# 3 Phillips|Slotted) Thread Length: Full Type: Sheet Metal Screw A sheet metal screw has sharp threads that cut into a material such as sheet metal plastic wood hard rubber... more

1 -8 x 5-1/2 Zinc Plated Grade 8 Steel Coarse Thread Hex Cap Screws HCS8-551

Diameter: 1 Length: 5-1/2 Material: Steel Finish: Yellow Zinc Head Style: Hex (1-1/2 Wrench) Thread Size: 8 (Coarse) Thread Length: 2-1/2 Hardness: Grade 8 Type: Cap Screw A hex cap screw has a hexagonal head designed to be driven by a wrench. more

8-32 x 1 1/2 Type F Thread Cutting Screws | Slotted | Hex Washers Head | Steel | Zinc (Quantity: 4000)

8-32 x 1 1/2 Type F Thread Cutting Screws | Slotted | Hex Washers Head | Steel | Zinc (Quantity: 4000) more

Prime-Line 9056125 Hex Lag Screws 3/8 in. X 1-1/2 in. A307 Grade A Hot Dip Galvanized Steel 100-Pack

Lag screw bolts are used in place of standard wood screws whenever the mounting surface must bear a heavy load. The hex head allows for lag screws to be tightened with more torque than can be used on phillips head screws though a pilot hole is still... more

Red Head WS-1242 Trubolt Carbon Steel Wedge 1/2-Inch by 4-1/4-Inch Anchor (25 per Box)

1/2 inch length:4-1/4 inch quantity:25 Durable Easy to set Use to connect wood frame to concrete more

x 1 1/2 Dowel Pins/Alloy Steel/Bright Finish (Quantity: 10 pcs)

0.875 (7/8 ) Length:1.500 (1-1/2 ) This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Heat Treated... more

1 1/2 -6 x 10 (FT) Coarse Thread Square Head Set Screw Cup Point Low Carbon Steel Case Hardened Plain Finish

PRODUCT SPECIFICATIONS Part #: 0000-135514 Fastener Type: Square Head Set Screw Cup Point Size Description: 1 1/2 -6 x 10 (FT) Diameter/Nominal Size: 1 1/2 Length: 10 Thread Pitch: 6 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage:... more

Hillman No. 9 X 7/16 in. W X 0.4375 in. L Blue Steel Double Point Tack Staple 9 Ga. 1-1/2 oz

Double pointed tacks (staples) are used to attach anything to wood like cloth or fabric. They are ideal for use in school office and have unlimited uses around the house. You ll find these tacks easy to use as they are sharp and double pointed staple... more

#10-14 x 1-1/2 White Painted Steel Hex Washer Head Pole Barn Self-Drilling Screws SSHW-142

Diameter: #10 Length: 1-1/2 Material: Steel Finish: Painted White Head Style: Hex Washer (1/4 Hex) Point Type: Drill Thread Size: 14 Thread Length: Full Style: With Bonded Washer Type: Self-Drilling Screw Application: Pole Barn|Treated Lumber A... more

5/8 -18 x 1-1/2 Zinc Plated Grade 8 Steel Fine Thread Hex Cap Screws HCS8-397

Diameter: 5/8 Length: 1-1/2 Material: Steel Finish: Yellow Zinc Head Style: Hex (15/16 Wrench) Thread Size: 18 (Fine) Thread Length: 1-1/2 Hardness: Grade 8 Type: Cap Screw A hex cap screw has a hexagonal head designed to be driven by a wrench. more

Uxcell 5/32-32 x 1-1/2 Hanger Bolts Carbon Steel Zinc Plated 20 Pack

Uxcell 5/16-18 x 2-3/4 Hanger Bolts Carbon Steel Zinc Plated 20 Pack Description: 1.Material: Carbon Steel construction with zinc plated provides great corrosion resistance and antirust ability for long service life. 2.Advantage: Good for wooden... more

x 1 1/2 Dowel Pins / Sainless Steel 18-8 / Bright Finish (Quantity: 100 pcs)

0.250 (1/4 ) Length:1.500 (1-1/2 ) Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Stainless Steel 18-8 more

x 1 1/2 Dowel Pins/Alloy Steel/Bright Finish (Quantity: 30 pcs)

0.750 (3/4 ) Length:1.500 (1-1/2 ) This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Heat Treated... more

#6 x 1-1/2 Zinc Plated Steel Phillips Pan Head Sheet Metal Screws SMSPS-184

Diameter: #6 Length: 1-1/2 Material: Steel Finish: Zinc Head Style: Pan (Phillips) Thread Length: Full Type: Sheet Metal Screw A sheet metal screw has sharp threads that cut into a material such as sheet metal plastic wood hard rubber aluminum and... more

Uxcell 5/16-18 x 1-1/2 Hanger Bolts Carbon Steel Zinc Plated 20 Pack

Uxcell 5/16-18 x 2-3/4 Hanger Bolts Carbon Steel Zinc Plated 20 Pack Description: 1.Material: Carbon Steel construction with zinc plated provides great corrosion resistance and antirust ability for long service life. 2.Advantage: Good for wooden... more

Uxcell #8 x 1-1/2 Carbon Steel Phillips Head Self Tapping Screws Black 100 Pack

Uxcell #8 x 1 Carbon Steel Phillips Head Self Tapping Screws Silver Tone 100 Pack Made of carbon steel with white zinc plated finish. The screw is corrosion resistant and durable. The self-tapping screws can drill well into wood sheet metal and other... more

x 1 1/2 Dowel Pins/Alloy Steel/Bright Finish (Quantity: 10 pcs)

0.875 (7/8 ) Length:1.500 (1-1/2 ) This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Heat Treated... more

MP6606 Adjustable Pivot Bracket 1/4 In. Top Mounted Steel Outside Diameter 1-15/16 x Length 3/4 Steel 2 Pack

MP6606 Adjustable Pivot Bracket 1/4 In. Top Mounted Steel Outside Diameter 1-15/16 x Length 3/4 Steel 2 Pack more

240051 Carriage Bolt 1/4 x 4-1/2-Inch Steel Zinc-Plated Silver 100-Pack

Carriage Bolts are designed to fasten a wooden face to either wood or metal Flat head provides a semi-flush finish to applications The heads is designed to eliminate the need for a washer Square underside of the head is self locking to eliminate the... more

Phillips Flat Head Self Drilling Screws Zinc Plated Steel TEK Sheet Metal Screws x 1-1/2 Qty 250

Phillips Flat Head Self Drilling Screws Zinc Plated Steel TEK Sheet Metal Screws Countersunk Flat Head Runs Flush with Installation Surface #3 TEK Self Drilling Points for Fast and Easy Installation - Fully Threaded for Excellent Retention Zinc plating... more

x 1 1/2 Dowel Pins/Alloy Steel/Bright Finish (Quantity: 10 pcs)

0.563 (9/16 ) Length:1.500 (1-1/2 ) This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Heat Treated... more

x 1 1/2 Dowel Pins/Alloy Steel/Bright Finish (Quantity: 200 pcs)

0.250 (1/4 ) Length:1.500 (1-1/2 ) This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Heat Treated... more

1/2-13 x 1 Type F Thread Cutting Screws | Unslotted | Hex Washers Head | Steel | Zinc (Quantity: 500)

1/2-13 x 1 Type F Thread Cutting Screws | Unslotted | Hex Washers Head | Steel | Zinc (Quantity: 500) more

#14 x 1-1/2 Zinc Plated Steel Phillips Flat Head Sheet Metal Screws SMSFLS-245

Diameter: #14 Length: 1-1/2 Material: Steel Finish: Zinc Head Style: Flat (# 3 Phillips Bit) Thread Length: Full Type: Sheet Metal Screw A sheet metal screw has sharp threads that cut into a material such as sheet metal plastic wood hard rubber... more

5/16 -18 x 1 1/2 (FT) Coarse Thread Grade 5 Hex Flange Screw with Serration Medium Carbon Steel Zinc Plated Pk 50

PRODUCT SPECIFICATIONS Part #: 0000-115429 Fastener Type: Hex Flange Screw with Serration Size Description: 5/16 -18 x 1 1/2 (FT) Diameter/Nominal Size: 5/16 Length: 1 1/2 Thread Pitch: 18 Thread Pitch Type: Coarse Thread Direction: Right Thread... more

Prime-Line 9062642 Carriage Bolts 1/4 in.-20 X 5-1/2 in. A307 Grade A Zinc Plated Steel 50-Pack

Carriage bolts feature a slightly rounded head and have no exposed sharp edges when fully fastened. Due to that reason they are often used when a more aesthetic look is desired. They are commonly used on docks and on playground equipment or in cases... more

1/4 28 x 2 1/4 Socket Head Screws Alloy Steel Black Oxide Partial Thread 100 Pack

1/4 28 x 2 1/4 Socket Head Screws Alloy Steel Black Oxide Partial Thread 100 Pack more

x 1 1/2 Dowel Pins / Sainless Steel 18-8 / Bright Finish (Quantity: 100 pcs)

0.187 (3/16 ) Length:1.500 (1-1/2 ) Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Stainless Steel 18-8 more

x 1 1/2 Dowel Pins/Alloy Steel/Bright Finish (Quantity: 10 pcs)

0.563 (9/16 ) Length:1.500 (1-1/2 ) This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Heat Treated... more

#4 x 1 1/2 Wood Screw Phillips Flat Head Low Carbon Steel Zinc Plated Pk 250

PRODUCT SPECIFICATIONS Part #: 0000-103829 Fastener Type: Wood Screw Phillips Flat Head Size Description: #4 x 1 1/2 Diameter/Nominal Size: #4 Length: 1 1/2 System of Measurement: Inch Material: Low Carbon Steel Finish: Zinc Plated Head Type: Flat... more

Machine Screws Flat Head Phillips Drive #8-32 X 1-1/2 in. Zinc Plated Steel 75-Pack

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. They are frequently used in machinery and appliances. more

x 1 1/2 Dowel Pins / Sainless Steel 18-8 / Bright Finish (Quantity: 50 pcs)

0.312 (5/16 ) Length:1.500 (1-1/2 ) Machine Press Fit Dowel Pins - meets ANSI B18.8.2 standard Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Stainless Steel 18-8 more

1 x 4 1/2 Dowel Pins/Alloy Steel/Bright Finish (Quantity: 10 pcs)

1 Length:4.500 (4-1/2 ) This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Heat Treated Alloy Steel more

x 1 1/2 Dowel Pins/Alloy Steel/Bright Finish (Quantity: 500 pcs)

0.093 (3/32 ) Length:1.500 (1-1/2 ) This Machine Press Fit Dowel Pin meets ANSI B18.8.2 standard and has a minimum surface hardness of 60 HRC Diameters machined to 0.0002 inch over the nominal diameter intended for initial installations Heat Treated... more