four faces artisan crafted wood

waltyotur 6 Inch Steel Wood Lathe Face Plate 1-1/4 Inch x 8TPI Threaded with Locking Set Screw to Secure on Spindle for Wood Lathe Turning Reversing Lathes

waltyotur 6 Inch Steel Wood Lathe Face Plate 1-1/4 Inch x 8TPI Threaded with Locking Set Screw to Secure on Spindle for Wood Lathe Turning Reversing Lathes This 4-Inch diameter faceplate s thickness is 7/16 and it has 8 Screwholes - 4 rows of 2 at 90... more

Bon Tool 11-368 Toothed Bush Hammer - 4 Lb 1 3/4 Face With Wood Handle

Manufacturer Part Number: 11-368 For shaping texturizing and facing soft stone Exceptionally strong dense steel hammer 25 teeth (5 x 5) are carefully milled 131/2 wood handle Use replacement handle #21-503 more

'Ferns and Buds' (set of 4) - Artisan Crafted Saa Wrapping Paper

Tumthong selects fern leaves and agaga flower buttons for the design of these wrapping papers. They are crafted by hand with natural saa pulp using legendary crafting procedures. Set includes four sheets of 45 grams each. more

Artisan Crafted Wood Ballerina Statuette from Bali 'Ballet Dancer III'

Hand carved from albesia wood, this charming and chubby ballerina gazes at you confidently as she performs an arabesque. Togog Suyasa of Bali adds a little humor to your home decor with this whimsical statuette featuring a square wood base with a black... more

Bear In The Woods Hand Crafted Wooden Paper And Towel Holder W/Storage - 16.5 X 12.75 X 4.75 inches

16 1/2 In. High, 12 3/4 In. Long, 4 3/4 In. Wide. Hand Crafted And Hand Carved From Natural Wood. Easily Mounts To The Wall Using The Attached Hangers On Back. Hang And Store Extra Paper Towel, Bath Tissue Or Towels. more

Garland 11-363 Rawhide Face Mallet - 2 3/4 Lb With Wood Handle

Manufacturer Part Number: 11-363 Expertly crafted from the highest quality rawhide Will not scar dent or mar surface Solid impact with no rebound Wood handle Replacement faces available (#11-365 - sold in pairs) more

Garland 11-364 Rawhide Face Mallet - 4 Lb With Wood Handle

Manufacturer Part Number: 11-364 Expertly crafted from the highest quality rawhide Will not scar dent or mar surface Solid impact with no rebound Wood handle Replacement faces available (#11-366 - sold in pairs) more

Garland 34004 Plastic Split Head Hammer with 14 Wood Handle 4 Lb Head 2 Face

Garland 4 Lb Head 2 Face Plastic Split Head Hammer Wood Handle more

Made in USA 3 Lb Head 1-3/4 Face Brass Nonmarring Hammer 14 OAL Wood Handle

Made in USA 3 Lb Head 1-3/4 Face Brass Nonmarring Hammer 14 OAL Wood Handle more

Pocket Hole Jig and Face Frame clamp kit with Builders 500 pack of pocket hole screws for 3/4 hard and soft wood. Build tables shelves cabinets furniture and more!

The VMTW PHJ-100 pocket hole system is the most affordable portable system on the market. The PH-100 system was designed for the person that does not want or need a lot of features they will not use. Perfect for the DIYer on a budget; simple and... more

Garland 6-1/2 Lb Head 2-3/4 Face Plastic Split Head Hammer Wood Handle

Garland 6-1/2 Lb Head 2-3/4 Face Plastic Split Head Hammer Wood Handle more

American Hammer 4 Lb Head 1-5/8 Face Brass Head Hammer 16 OAL Wood Handle

American Hammer 4 Lb Head 1-5/8 Face Brass Head Hammer 16 OAL Wood Handle more

Bon Tool 11-807 Toothed Bush Hammer - 2 Lb 1 1/4 Face With Wood Handle

Manufacturer Part Number: 11-807 For shaping texturizing and facing soft stone Exceptionally strong dense steel hammer 25 teeth (5 x 5) are carefully milled 10 wood handle Use replacement handle #11-266 more

Made in USA 3 Lb Head 1-3/4 Face Brass Nonmarring Hammer 14 OAL Wood Handle

Made in USA 3 Lb Head 1-3/4 Face Brass Nonmarring Hammer 14 OAL Wood Handle more

Made in USA 3 Lb Head 1-3/4 Face Copper Nonmarring Hammer 14 OAL Wood Handle

Made in USA 3 Lb Head 1-3/4 Face Copper Nonmarring Hammer 14 OAL Wood Handle more

Rawhide Faces - Size: 4 Face Diameter: 2 For Split-Head Hammer

Brand: Handle Material:Hickory Wood Color:Brown Style:German more

Garland 71-551 Rawhide Face Replacement Mallet Face - 2 3/4 Diameter

Expertly crafted from the highest quality rawhide Will not scar dent or mar surface Solid impact with no rebound more

Planishing Chasing Hammer Dual Face MetalSmith Tool 3/4 Flat Face

Dual Face Chasing Hammer Flat Domed for Crafts Metalwork & Jewelry Repair 1 This is a new chasing hammer with a wood handle Great for silversmiths blacksmiths metalsmiths planishing and anyone who uses an anvil or staking tools One side is flat the... more

Deadwood Crafted Tools Wood Corner Clamp Kit - 4pc Steel 90 Degree Corner Clamps

Make squaring corners on your woodworking projects easier with the DCT 4 Pack Corner Clamp 90 Degree Wood Clamps Woodworking Sets. L-shaped design helps you position and check corners when joining gluing cutting or assembling perfectly squared corners.... more

Made in USA 1-1/2 Lb Head 1-1/4 Face Copper Nonmarring Hammer

Made in USA 1-1/2 Lb Head 1-1/4 Face Copper Nonmarring Hammer 12 OAL Wood Handle more

Garland 71-519 Rawhide Face Mallet - 6 1/2 Lb With Wood Handle

Manufacturer Part Number: 71-519 Expertly crafted from the highest quality rawhide Will not scar dent or mar surface Solid impact with no rebound Wood handle Replacement faces available (#71-551 - sold in pairs) more

Truper MD4HC 4 lbs. Double Face Engineers Hammer

Red-forged head with polished double faces. Hickory handle. Shipped assembled. 16 hickory wood handle. No. MD3H-D: Type: Engineer Hammer Head Weight: 3 lb Handle Material: Hickory Wood Face: Polished Steel No. MD4H-D: Type: Engineer Hammer Head Weight:... more

Made in USA 1 Lb Head 1-1/4 Face Copper Nonmarring Hammer

Made in USA 1 Lb Head 1-1/4 Face Copper Nonmarring Hammer 10-1/2 OAL Wood Handle more

Made in USA 1/2 Lb Head 3/4 Face Copper Nonmarring Hammer

Made in USA 1/2 Lb Head 3/4 Face Copper Nonmarring Hammer 10-1/2 OAL Wood Handle more

Made in USA 1/2 Lb Head 3/4 Face Copper Nonmarring Hammer

Made in USA 1/2 Lb Head 3/4 Face Copper Nonmarring Hammer 10-1/2 OAL Wood Handle more

3 Lb Head 1-3/4 Face Brass Nonmarring Hammer

3 Lb Head 1-3/4 Face Brass Nonmarring Hammer 14 OAL Wood Handle (MOQ=1 Pkg Qty=1) more

3 Lb Head 1-3/4 Face Copper Nonmarring Hammer

3 Lb Head 1-3/4 Face Copper Nonmarring Hammer 14 OAL Wood Handle (MOQ=1 Pkg Qty=1) more

Made in USA 1 Lb Head 1-1/4 Face Brass Head Striking Tool Hammer

Made in USA 1 Lb Head 1-1/4 Face Brass Head Striking Tool Hammer 10-1/2 OAL Wood Handle more

Made in USA 1 Lb Head 1-1/4 Face Brass Head Striking Tool Hammer

Made in USA 1 Lb Head 1-1/4 Face Brass Head Striking Tool Hammer 10-1/2 OAL Wood Handle more

Made in USA 1/2 Lb Head 3/4 Face Brass Head Striking Tool Hammer

Made in USA 1/2 Lb Head 3/4 Face Brass Head Striking Tool Hammer 10-1/2 OAL Wood Handle more

Made in USA 1/2 Lb Head 3/4 Face Brass Head Striking Tool Hammer

Made in USA 1/2 Lb Head 3/4 Face Brass Head Striking Tool Hammer 10-1/2 OAL Wood Handle more

Garland 71-527 Urethane Face Mallet - 2 3/4 Lb

Manufacturer Part Number: 71-527 Solid wood handle is balanced for easy gripping and better control Faces are replaceable - Use #71-559 (sold in pairs) 33 shore D scale more

Garland 71-528 Urethane Face Mallet - 4 Lb

Manufacturer Part Number: 71-528 Solid wood handle is balanced for easy gripping and better control Faces are replaceable - Use #71-560 (sold in pairs) 33 shore D scale more

Vaughan 10 Oz in. Wood Handle Smooth Face Little Pro Ripping Hammer

Ideal for cabinet making and finishing work Balanced small hammer White hickory handle Replacement handle (1341-6854) Smooth face length 10 oz Length: 11.5 Width: 1 Height: 4.5- SKU: ZX99JNSN32288 more

Big Horn 19871 1-1/4 Inch Chasing Hammer Face Jewelry Making Metal Forming Flattening Tool

This hammer is designed to be used chasing and flattening soft metals. The handle is hardwood featuring a wedge and oblong hole to keep the head from turning.Great for silversmiths goldsmiths jewelers crafts and other hobby work. Made from wood and... more

CHASING HAMMER PISTOL HANDLE 1-1/4 FACE

Chasing Hammer 1-1/4 Face Diameter:1-1/4 (31.7 mm) Overall length:10 (25.4 cm) Head Weight:5.15 Oz Handle:Wood more

Uxcell Engineers Hammer 4 Lb Wooden Grip Double Flat Face for Home Repairs Woodworking Black Yellow

1. The hammer head is made of forged carbon steel strong and durable. The rust-resistant paint protects against corrosion. The wood handle is durable and shock-absorbing. 2. This forging hammer provides powerful strikes making it suitable for various... more

Bon Tool 21-804 Rubber Face Paver Hammer - 4 Lb

Manufacturer Part Number: 21-804 Non-marking square-shaped white rubber head Ideal for setting payers or wall units Steel head covered with long lasting rubber 23/4 diameter face 81/2 wood handle more