See Matches In
Narrow Search Results
| Best Seller  | CRL AS142-XCP10 CRL Stainless Steel 2 Long Allen Screw for 3/4 & 1 Standoffs - pack of 10 CRL Stainless Steel Allen Screws are available in incremental lengths from 3/4 (19 mm) to 2 (51 mm) for 3/4 (19 mm) and 1 (25 mm) diameter Standoffs. Most shipping weights are approximate and have not been verified. If the exact weight is needed in... more | go to store |
 | CRL SHCS14X1-XCP10 CRL 1/4-20 x 1 Stainless Steel Angle Collar Attaching Bolt - pack of 10 CRL Socket Head Cap Screws are used to secure glass railing Base Shoe to approved 1/2 (12.7 mm) steel embedment plates with a minimum 1/2 (12.7 mm) of thread engagement. Cat. No. SHCS12X34 are also for use with CRL Weld Blocks. Most shipping weights... more | FREE shipping go to store |
| Best Seller  | CRL AS516114-XCP10 CRL Stainless Steel 5/16 -18 x 1-1/4 Long Allen Screw - pack of 10 This CRL Stainless Steel Allen Screw is available in incremental lengths from 3/4 to 3 (19 to 76.2 mm) and is for use with Standoffs Hand Rail Mounting Brackets and other products that require this type of Allen Screw. Most shipping weights are... more | go to store |
 | CRL HB38112Z-XCP10 CRL Zinc 1-1/2 Long Hanger Bolt for 1-1/2 and 2 Diameter Standoffs - pack of 10 These CRL Hanger Bolts available in Stainless Steel or Zinc finishes and can be used in wood or with plastic anchors. They have a 3/8 -16 thread that will secure all 1-1/2 and 2 (38 and 51 mm) Standoff Bases. Most shipping weights are approximate and... more | go to store |
 | CRL DS37W-XCP10 CRL White Aluminum Door Sweep - pack of 10 These CRL Aluminum Door Sweeps offer the most weatherstrip for the money. A full 1-5/8 (41.3 mm) height fills even the largest under-door gaps and the 36 (914 mm) length fits most standard doors. The Sweep is constructed of sturdy extruded aluminum... more | go to store |
 | CRL DS37BRW-XCP10 CRL Bronze Aluminum Door Sweep - pack of 10 These CRL Aluminum Door Sweeps offer the most weatherstrip for the money. A full 1-5/8 (41.3 mm) height fills even the largest under-door gaps and the 36 (914 mm) length fits most standard doors. The Sweep is constructed of sturdy extruded aluminum... more | go to store |
 | CRL Socket Head Cap Screws are used to secure RS0B20 Standoffs to a steel substrate with a minimum of 3/8 (10 mm) of thread engagement. Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to... more | go to store |
 | CRL TL3X10-XCP10 CRL TAPER-LOC for 3/8 Monolithic Tempered Glass - pack of 10 CRL s TAPER-LOC® Taper Set for 3/8 (10 mm) tempered glass is made up of two Tapers and one L-Setting Block. Tapers are made of high strength reinforced nylon. They expand in thickness when compressed together with the Cat. No. TLK9... more | $89.12 $71.13 go to store |
 | CRL HW060-XCP10 CRL Clear 3/4 O.D. Square Washer Vinyl with Sleeve 0.01 Oz Weight - Pack of 10 This CRL Clear Vinyl Washer is designed to work with the 3/4 (19 mm) Square Standoff Cap Assembly to protect the glass edges around the drilled hole against chipping and scratching. NOTE: This washer is included with the purchase of the Cap Assembly... more | FREE shipping go to store |
 | CRL SHCS12X112-XCP10 Stainless Steel 1/2-13 x 1-1/2 Socket Head Cap Screw - pack of 10 CRL Socket Head Cap Screws are used to secure glass railing Base Shoe to approved 1/2 (12.7 mm) steel embedment plates with a minimum 1/2 (12.7 mm) of thread engagement. Cat. No. SHCS12X34 are also for use with CRL Weld Blocks. Most shipping weights... more | go to store |
 | CRL SHCS12X1-XCP10 Stainless Steel 1/2-13 x 1 Socket Head Cap Screw - pack of 10 CRL Socket Head Cap Screws are used to secure glass railing Base Shoe to approved 1/2 (12.7 mm) steel embedment plates with a minimum 1/2 (12.7 mm) of thread engagement. Cat. No. SHCS12X34 are also for use with CRL Weld Blocks. Most shipping weights... more | $26.72 $20.14 go to store |
 | CRL 8-18 x 3/4 Self-Drilling Pan Head Phillips Screws are available in several architectural finishes to match CRL Railing Components. Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine... more | go to store |
 | CRL WSC412-XCP100 CRL 1/4 Stainless Steel Screen Corner Tension Springs - Bulk - pack of 100 CRL Stainless Steel Flat Tension Springs slip into the corners of 5/16 to 7/16 (7.9 to 11 mm) screen frame to help hold screens tightly in the window channel. No tools or drilling is required for installation. The spring simply slips into the square or... more | go to store |
 | CRL SurfaceMate® Curved Block Sets allow for minor adjustments to the placement of the base shoe so it can be adjusted to perfect plumb. The Angle Adjust Curved Block (Cat. No. AACS2) can be used in fascia mount application of SurfaceMate® Base Shoe.... more | go to store |
 | Hilti EBA334-XCP10 CRL Hilti M8 3-3/4 Long HSL-3 Expansion Anchor - pack of 10 The Hilti® HSL-3 is a 2003 and 2006 IBC compliant torque controlled heavy-duty Expansion Bolt designed for high performance in static and dynamic load applications. Delivers optimum performance in cracked concrete. 3-7/8 (98 mm) long. TECHNICAL DATA:... more | go to store |
 | CRL LB600-XCP20 CRL 3/8 x 6 Lag Bolt - pack of 20 Use CRL Lag Bolts with CRL Stainless Steel Washers (WSHR1) and Color Match Bolt Cover Buttons (BTN1) to create a finished look. All Lag Bolts are designed to attach to a wooden substrate. Requires a 9/16 Socket for installation. Most shipping weights... more | $92.04 $85.74 go to store |
 | CRL LB350-XCP20 CRL 3/8 x 3-1/2 Lag Bolt - pack of 20 Use CRL Lag Bolts with CRL Stainless Steel Washers (WSHR1) and Color Match Bolt Cover Buttons (BTN1) to create a finished look. All Lag Bolts are designed to attach to a wooden substrate. Requires a 9/16 Socket for installation. Most shipping weights... more | $49.14 $46.62 go to store |
 | CRL TEK1-XCP50 CRL 8 x 3/4 Pan Head Square Insert Tek Screw - pack of 50 Use CRL Self-Tapping Tek Screws for the installation of our 100 200 300 350 and 400 Series Aluminum Railings. Tek Screws are stainless steel #8 x 3/4 and have special crosscuts which allow them to tap their own threads in aluminum. Screws require Cat.... more | go to store |
 | Our CRL Z-Series Round Type Radius Base Glass Clamps are designed to be used on glass thickness of 1/4 to 1/2 (6 to 12 mm) and are available in either zinc or stainless steel. The clamps are the perfect solution for partitions railings windbreaks and... more | go to store |
 | Our CRL Z-Series Round Type Radius Base Glass Clamps are designed to be used on glass thickness of 1/4 up to 5/16 (6 to 8 mm) and are available in either zinc or stainless steel. The clamps are the perfect solution for partitions railings windbreaks... more | go to store |
 | CRL Z712BS Brushed Stainless Z-Series Square Type Radius Base Stainless Steel Clamp for 1/2 Glass This CRL Z-Series Square Type Radius Base Glass Clamp is designed to be used on glass thickness of 1/2 (12 mm). Constructed from either zinc or stainless steel the clamps are the perfect solution for partitions railings windbreaks and countless other... more | go to store |
 | CRL Z912BS Brushed Stainless Z-Series Square Type Flat Base Stainless Steel Clamp for 1/2 Glass This CRL Z-Series Square Type Flat Base Glass Clamp is designed to be used on glass 1/2 (12 mm) thickness. Constructed from either zinc or stainless steel the clamps are the perfect solution for partitions railings windbreaks and countless other... more | go to store |
 | Our CRL Z-Series Round Type Radius Base Glass Clamps are designed to be used on glass thickness of 1/2 (12 mm) and are available in either zinc or stainless steel. The clamps are the perfect solution for partitions railings windbreaks and countless... more | go to store |
 | CRL Z710PS Polished Stainless Z-Series Square Type Radius Base Stainless Steel Clamp for 3/8 Glass This CRL Z-Series Square Type Radius Base Glass Clamp is designed to be used on glass thickness of 3/8 (10 mm). Constructed from either zinc or stainless steel the clamps are the perfect solution for partitions railings windbreaks and countless other... more | go to store |
 | CRL Z312PS Polished Stainless Z-Series Round Type 2 Radius Base Stainless Steel Clamp for 1/2 Glass Our CRL Z-Series Round Type Radius Base Glass Clamps are designed to be used on glass thickness of 1/4 up to 1/2 (6 to 12 mm) and are available in either zinc or stainless steel. The clamps are the perfect solution for partitions railings windbreaks... more | go to store |
 | CRL Z510PS Polished Stainless Z-Series Round Type Flat Base Stainless Steel Clamp for 3/8 Glass This CRL Z-Series Round Type Flat Base Glass Clamp is designed to be used on glass thickness of 3/8 (10 mm) Glass. Constructed from either zinc or stainless steel the clamps are the perfect solution for partitions railings windbreaks and countless... more | go to store |
 | CRL Z310BS Brushed Stainless Z-Series Round Type 2 Radius Base Stainless Steel Clamp for 3/8 Glass Our CRL Z-Series Round Type Radius Base Glass Clamps are designed to be used on glass thickness of 3/8 (10 mm) and are available in either zinc or stainless steel. The clamps are the perfect solution for partitions railings windbreaks and countless... more | go to store |
 | CRL FMR2VBS Brushed Stainless Regular Duty Spider Fitting Double Arm V Wall Mount Frame This CRL Fitting is used to attach a single glass panel to a wall or structural fin. Comes with two M10-1.5 x 65 mm (2-9/16 ) stainless steel threaded studs and four matching cap nuts with washers. Replacement Stud Set is available. For companion... more | $131.51 $111.09 go to store |
 | CRL SERAHW2PS Polished Stainless Adjustable Height Track Holder Fitting for Wall - pack of 2 The CRL Adjustable Height Track Holder Fitting for Wall is an improved version of our SERW2 Standard Track Holder Fitting for walls. Various slots inside the fitting allows vertical adjustment for mounting of the header bar in and out of level... more | $57.18 $46.75 go to store |
 | CRL FRCB15PS Polished Stainless Combination Foot Railing Bracket for 1-1/2 Tubing CRL Combination Foot Railing Brackets are available in three architectural finishes for 1-1/2 or 2 (38 or 51 mm) Tubing. Brackets are individually packed and come with two #12 x 2 (51 mm) Phillips Flat Head Wood Screws. Tubing is secured with integral... more | go to store |
 | The CRL Plaza Series Glass Partition and Divider Posts feature precision craftsmanship with 1-1/2 (38 mm) stainless steel square tubing allowing seamless attachment of 1/4 (6 mm) glass using Cat. No. 33SC Clear Silicone in full compliance with CRL... more | go to store |
 | CRL ACSB22PS 316 Polished Stainless Clad Aluminum 2 Diameter by 2 Long Standoff Base CRL s 2 (51 mm) Diameter Clad Aluminum Standoff Bases are perfect for attaching heavy glass granite and marble to the top of cabinetry. They have 3/8 -16 threads — 1 and 1-1/2 (25 and 38 mm) lengths are drilled and tapped through while the 2 (51 mm)... more | go to store |
 | CRL Slimline Sneeze Guards are constructed of 1 (25.4 mm) stainless steel tubing. Full flange type bases are supplied for surface mounting. The fixed glass on the front and slant is secured with nylon tipped set screws in the glass fittings which will... more | go to store |
 | CRL CBR5BS 316 Brushed Stainless Center Standoff Connector (Radius Back) CRL s Stainless Steel Standoff Connectors are designed to support 12 mm diameter Stainless Steel Bar. Our easy slip fit design allows for clean seamless installations. No special welding or fabrication required. When attaching to the post use our Cat.... more | go to store |
 | CRL Boat Top Bottom Mount Hinge PPH01BN | 3 5/8 Inch Stainless Steel Boat part number 1063980 is a new Prima 01 Series Top or Bottom mount hinge from CRL part number PPH01BN . Commonly used on Ocean Yachts but may be used on other boats. This Prima 01 Series Top or Bottom mount hinge is constructed out of silver... more | FREE shipping go to store |
 | CRL VPS222BS Brushed Stainless 22 Variant Series Adjustable Pull Handle with VP2 Mounting Post The CRL Variant Series Adjustable Mounting Post Style Pulls are designed to fit on standard hole patterns of 12 18 and 24 (305 457 and 610 mm) centers but with its adjustable mounting posts will fit almost any hole pattern from 6 to 26-3/4 (152 to 679... more | go to store |
 | CRL SREC4SBS Brushed Stainless 4 Square End Cap for Sidelite Rails CRL End Caps are used to finish your installation when using CRL Sidelite Rails. Each End Cap matches the finish of our Sidelite and Door Rails perfectly. Attaches with provided matched finish machine screw. Our policy for Quick Pick products is as... more | go to store |
 | CRL LS3BS Brushed Stainless Laguna Series Transom/Sidelite Free-Swinging Top Pivot Fitting The CRL Transom/Sidelite Free-Swinging Top Pivot Fitting attaches to the sidelite panel and the glass transom over the door. Comes with both Flush Mount and Surface Mount Fasteners. NOTE: The following guidelines are to be used when making a door using... more | go to store |
 | CRL ACSB1126PS 316 Polished Stainless Clad Aluminum Standoff Base 1-1/2 Diameter by 6 Long CRL s 1-1/2 (38 mm) Diameter Clad Aluminum Standoff Bases provide the user with unlimited design potential for retail store display restaurant or commercial applications. They have 3/8 -16 threads - 1 and 1-1/2 (25.4 and 38 mm) lengths are drilled and... more | go to store |
 | CRL RCAP2PS 316 Polished Stainless 2 RSOB Replacement Standoff Flat Cap Assembly This CRL Replacement Standoff Cap is designed for use with CRL s RSOB Series Standoff Fittings. Each Cap Assembly Includes: 1 Each Cap 1 Each 3/8 -16 Allen Screw 1 Each Grommet 2 Each Black Gaskets Most shipping weights are approximate and have not... more | go to store |
Ads related to crl as141 xcp10 crl stainless
