Narrow Search Results
Price Range
Brand
Stores
| Best Seller  | DAYTON 4THZ5 3-Phase General Purpose Motor, 3/4 HP, 56C Frame, 230/460V AC General Purpose Motor, Three Phase, Motor Design 3-Phase, 3/4 HP, Nameplate RPM 1,135, No. of Speeds 1, Voltage 230/460V AC, Full Load Amps 3.0/1.5 A, 56C Frame, Hz 60 Hz, Motor Service Factor 1.15, Max. Ambient Temp. 104 Degrees F, Motor Thermal... more | go to store |
 | Cambro KSC402191 45 1/2"H Portable Sink Cart w/ (2) 4"D Bowls, Hot Water, Granite Grey The Hand Wash Sinks by Cambro: CamKiosk Hand Sink Cart, with 2 compartment sink, polyethylene construction, (2) 5-gallon fresh water tanks and (2) 7-1/2 gallon refuse tanks, 2-1/2 gallon hot water heater, paper towel holder and soap dispenser, 6... more | $7,475.00 $3,869.00 go to store |
| Best Seller  | KILLARK LL17 Conduit Outlet Body,Iron,LL,1/2 In. Conduit Outlet Body, Overall Width 3 3/4 in, Overall Height 5 1/2 in, Overall Length 6 7/8 in, Weight 0.9 lb, Trade Size 1/2 in, Compatible Conduit Trade Size 1/2 in, Hub Size 1/2 in, Compatible Cover 170, 170C, 170CG, 170CGSA, 170CSA, 170G, 170GSA,... more | go to store |
 | EEMAX ED020480T2T Electric Tankless Water Heater, 480V, 20000W Electric Tankless Water Heater, Operating Voltage 480V AC, Phase Three, Cold Inlet Size 1/2 in, Maximum Flow Rate 4 gpm, Minimum Flow Activation 0.7 gpm, Overall Height 12.25 in, Overall Width 18.25 in, Overall Depth 4.5 in, Power Consumption 20,000... more | go to store |
 | COPE 248-24ST-12 Reducing Fitting,Straight,24 to 12 In, Ladder Tray Reducing Fitting, For Use With Cope 24 in Ladder Trays 2HCL3 and 2HCL5, Finish Unfinished, Material Aluminum, Height 5 1/4 in, Length 12 in, Width 24 in, For Tray Width 24 in, Mounting Hardware Included No, Number of Pieces 1 more | go to store |
 | ASHCROFT 35W1005PH02LXULZG300#-8382 Pressure Gauge, 0 to 300 psi, 1/4 in MNPT, Pressure Gauge, Gauge Type Sprinkler System, Dial Size (In.) 3-1/2, Range 0 to 300 psi, Connection Size 1/4" NPT, Connection Location Lower, Smallest Graduation (PSI) 5, Accuracy (%) +/-3-2-3, Case Material ABS Plastic, Case Color Black, Socket... more | go to store |
 | PROTO J07527 3/4 in Drive Impact Socket 1 11/16 in Size 6 pt Standard Depth, Impact Socket, Socket Size 1 11/16 in, Socket Shape 6-Point, Drive Type Impact, Drive Size 3/4 in, Compatible Fastener Type Bolts, Screws, Studs, No, Alloy Steel, Black Oxide, Impact Rated Yes, Socket Depth Standard, Socket Length 2 5/8 in more | go to store |
 | PROTO J07521 3/4 in Drive Impact Socket 1 5/16 in Size 6 pt Standard Depth, Impact Socket, Socket Size 1 5/16 in, Socket Shape 6-Point, Drive Type Impact, Drive Size 3/4 in, Compatible Fastener Type Bolts, Screws, Studs, No, Alloy Steel, Black Oxide, Impact Rated Yes, Socket Depth Standard, Socket Length 2 3/16 in more | go to store |
 | LEGRIS 7065 04 14 Flow Control Regulator,4mm OD Flow Control Valve, Directions Controlled 1, Valve Inlet Port 5/32 in Push To Connect, Valve Outlet Port 1/4 in NPT, Valve Max. Pressure Rating 145 psi, Pressure Range 14.5 to 145 psi, Max. Temp. 158 Degrees F, Pneumatic Valves Product Group Flow... more | go to store |
 | MORSE ZWEDR18MAT-5' 4-1/2 Band Saw Blade, 5 ft. 4-1/2 in L, 1/2" W, 18 TPI, Band Saw Blade, Primary Material Application General Purpose Metal Cutting, Materials Cut Carbon Steel, Tool Brand MK Morse, Blade Series Matrix II, Use Case General/Maintenance, Blade Width 1/2 in, Blade Length 64-1/2 in, Blade Thickness 0.025 in,... more | go to store |
 | PROTO J07529 3/4 in Drive Impact Socket 1 13/16 in Size 6 pt Standard Depth, The Proto J07529 Impact Socket is the perfect tool for getting into tight spaces. It can be used on a variety of fasteners, from hex to square nuts and bolts. The impact socket has an overall length of 2 5/8 in., a 3/4 in. drive size, and a 1-13/16... more | go to store |
 | NORTON ABRASIVES 63642502985 Qk Chang Dsc Backup Pad,4-1/2"D,TS Fiber Disc Backup Pad, Abrasive Mount Type Quick Change, Abrasive Mounting Quick Change System TN, Connector Size 5/8 In.-11, Connector Type Threaded Hole, Backup Pad Shape Triangle, Device Material Plastic, Density Hard, Maximum Operating Speed... more | go to store |
 | WIDIA M41254 Carbide Bur,Cylindrical,1/4,dbl End Cut Carbide Bur, End Type Cut, Cut Type Double, Shank Dia. 1/4 in, Head Dia. 1/4 in, Head Length 5/8 in, Included Angle Not Applicable, Overall Length 2 in, Trade Number SB-1, Head Shape Cylinder, System of Measurement Inch, Shank Material Solid Carbide more | go to store |
 | WILKERSON F01-02-000 Inline Air Filter Compressed Air Filter, Air Inlet Size 1/4 in, Air Inlet Type NPT, Air Outlet Size 1/4 in, Air Outlet Type NPT, Overall Length 2 1/2 in, Outside Diameter 1 in, Filter Rating 5 micron, Maximum Flow Rate 17 cfm, Maximum Operating Pressure 200 psi, Body... more | go to store |
 | WEILER 94036 Wire Whel Wire Brush, Stem, 3-1/4", 0.020 " Wire Wheel Brush, Bristle Type Standard Twist Knot Wire, Product Type Wire Wheel Brush, Bristle Material Carbon Steel, Brush Dia. 3 1/4 in, Grit Not Applicable, Face Width 3/8 in, Bristle Diameter 0.02 in, Bristle Length 5/8 in, Compatible Tool Type... more | go to store |
 | LENOX 70123D2B51640 Band Saw Blade, 5 ft. 4-1/2 in L, 1/2" W, 14 TPI, Bimetal, Band Saw Blade, Primary Material Application General Purpose Metal Cutting, Materials Cut Aluminum, Carbon Steel, Stainless Steel, Tool Brand Lenox, Blade Series Diemaster 2, Use Case General/Maintenance, Blade Width 1/2 in, Blade Length 64-1/2 in,... more | go to store |
 | SK PROFESSIONAL TOOLS 41218 1/2 in Drive Hex Socket Bit SAE 9/16 in Tip, 4 5/32 Product details about the SK PROFESSIONAL TOOLS - 41218 Bit Socket. Bit sockets are specialized tools designed to work with various types of screw heads and bolts, offering a secure grip and precise application. They come in a range of sizes and... more | go to store |
 | Abrasive Blast Nozzle Kit, Product Type Nozzle Kit, Feed Type Pressure, Material Ceramic, Shape Tapered, Inner Diameter 5/16 in, Tip Outer Diameter 1/2 in, Base Outer Diameter 1 1/8 in, Overall Length 3 3/4 in, Air Flow - Maximum 125 cfm, Includes... more | go to store |
 | SK PROFESSIONAL TOOLS 42975 1/4 in Drive Torx(R) Socket SAE T25 Tip, 5 in L Socket Bit, Insert Length 3 9/16 in, Replaceable Insert Yes, Torx, Tip Size T25, Tip Style Torx, Overall Length 5 in, Drive Size 1/4 in, Socket Depth Standard, For Screw Type Torx, Alloy Steel more | go to store |
 | SK PROFESSIONAL TOOLS 42977 1/4 in Drive Torx(R) Socket SAE T27 Tip, 5 in L Socket Bit, Insert Length 3 7/16 in, Replaceable Insert Yes, Torx, Tip Size T27, Tip Style Torx, Overall Length 5 in, Drive Size 1/4 in, Socket Depth Standard, For Screw Type Torx, Alloy Steel more | go to store |
 | ZORO SELECT 18C784 Pressure Gauge, 0 to 30 in wc, 1/4 in MNPT, Steel, Black Low Pressure Gauge, Accuracy +/-1.5 Percent, Gauge Case Material Steel, Nominal Dial Size 2 1/2 in, Lens Material Polycarbonate, IP/NEMA Rating Not Rated, Hazardous Location Rating Not Rated, Sensor Material Copper Alloy, Socket Material Copper... more | go to store |
 | ZORO SELECT 18C783 Pressure Gauge, 0 to 15 in wc, 1/4 in MNPT, Steel, Black Low Pressure Gauge, Accuracy +/-2.5 Percent, Gauge Case Material Steel, Nominal Dial Size 2 1/2 in, Lens Material Polycarbonate, IP/NEMA Rating Not Rated, Hazardous Location Rating Not Rated, Sensor Material Copper Alloy, Socket Material Copper... more | go to store |
 | ZORO SELECT 18C790 Pressure Gauge, 0 to 5 psi, 1/4 in MNPT, Steel, Black Low Pressure Gauge, Accuracy +/-1.5 Percent, Gauge Case Material Steel, Nominal Dial Size 2 1/2 in, Lens Material Polycarbonate, IP/NEMA Rating Not Rated, Hazardous Location Rating Not Rated, Sensor Material Copper Alloy, Socket Material Copper... more | go to store |
 | ZORO SELECT 18C774 Pressure Gauge, 0 to 5 psi, 1/4 in MNPT, Steel, Black Low Pressure Gauge, Accuracy +/-1.5 Percent, Gauge Case Material Steel, Nominal Dial Size 2 1/2 in, Lens Material Polycarbonate, IP/NEMA Rating Not Rated, Hazardous Location Rating Not Rated, Sensor Material Copper Alloy, Socket Material Copper... more | go to store |
 | ZORO SELECT 18C778 Pressure Gauge, 0 to 32 oz/sq in, 1/4 in MNPT, Steel, Black Low Pressure Gauge, Accuracy +/-1.5 Percent, Gauge Case Material Steel, Nominal Dial Size 2 1/2 in, Lens Material Polycarbonate, IP/NEMA Rating Not Rated, Hazardous Location Rating Not Rated, Sensor Material Copper Alloy, Socket Material Copper... more | go to store |
 | NORTON ABRASIVES 66254429243 Depressed Center Wheels, Type 27, 4 1/2 in Dia, Non-Woven Depressed Center Disc, Abrasive Material Aluminum Oxide, Grade Medium, Overall Diameter 4 1/2 in, Series Vortex Rapid Blend, Maximum Operating Speed 12,000 RPM, Connector Size 5/8 In.-11, Connector Type Threaded Hole, Abrasive Type... more | go to store |
 | ZORO SELECT SK34 QD Bushing,Series SK,Bore 3/4 In Quick Detachable Bushing, Bushing Type Quick Detachable, Bore Bushing Series SK, Bore Diameter 3/4 in, Length 1.875 in, Bolt Circle Diameter 3.31 in, Bolt Size 5/16 In.-18 x 2 in, System of Measurement Inch, Bushing Diameter 2.813 in, Flange Type... more | go to store |
 | QA1 CFR12S Female Stud Rod End,RH,3/4-16 Spherical Rod End, System of Measurement Inch, Ball Stud Center Length 3 in, Ball Stud Thread Length 1 5/8 in, Ball Stud Thread Size 3/4 In.-16, Bore Diameter 3/4 in, Head Outside Diameter 1 3/4 in, Head Width 0.593 in, Shank Thread Length 1 1/2 in,... more | go to store |
 | VICTOR 0330-0008 Cutting Tip,1 Piece,Size 5,Acetylene Cutting Tip, Compatible Fuel Type Acetylene, For Torch Type Handheld, Machine, Tip Series 1-101, Tip Size 5, Tip Design One Piece, Minimum Cutting Thickness 4 in, Maximum Cutting Thickness 5 in, Compatible Cutting Torch Series HC 1200C, MT 1065, MT... more | go to store |
 | ZORO SELECT 310-002121 Carbide Bur,Tree,1/2 In,1/4 Shank Carbide Bur, End Type Radius, Cut Type Double, Shank Dia. 1/4 in, Head Dia. 1/2 in, Head Length 1 in, Included Angle Not Applicable, Overall Length 2 3/4 in, Trade Number SF-5, Primary Material Application Brass, Bronze, Carbon Steel, Cast Iron,... more | go to store |
 | CMT 835.317.11 Rabbeting Router Bit,HW,1-1/4 in Rabbeting Cut Profile Router Bit, Carbide Tipped, 1 1/4 in Cutter Dia., Fractional Inch, 1/2 in, 2 5/16 in, 1/4 in more | go to store |
 | ZORO SELECT 310-002075 Carbide Bur,Radius End,1/2 In,1/4 Shank Carbide Bur, End Type Radius, Cut Type Double, Shank Dia. 1/4 in, Head Dia. 1/2 in, Head Length 1 in, Included Angle Not Applicable, Overall Length 2 3/4 in, Trade Number SC-5, Primary Material Application Brass, Bronze, Carbon Steel, Cast Iron,... more | go to store |
 | SPYDER 600107CF Hole Saw,Bi-Metal,5In Hole Saw, Primary Material Application Wood, Materials Cut Masonry, Metal, Plastics and Composites, Wood, Arbor Design Not Included, Tooth Material Bi-Metal, Saw Dia. 5 in, Teeth per Inch 4/6, Max. Cutting Depth 1 7/8 in, Impact Rated No, Thread... more | go to store |
 | ZORO SELECT 310-002021 Carbide Bur,Cylinder,1/2 In,1/4 Shank Carbide Bur, End Type Flat, Cut Type Double, Shank Dia. 1/4 in, Head Dia. 1/2 in, Head Length 1 in, Included Angle Not Applicable, Overall Length 2 1/2 in, Trade Number SA-5, Primary Material Application Brass, Bronze, Carbon Steel, Cast Iron,... more | go to store |
 | CMT 801.128.11B Mortise Router Bit, HW, 1/2 in Hinge Mortise Cut Profile Router Bit, Carbide Tipped, 1/2 in Cutter Dia., Fractional Inch, 1/4 in, 1 5/8 in, 1/4 in more | go to store |
 | WRIGHT TOOL 6842 3/4 in Drive Impact Socket 1 5/16 in Size, Standard Socket, Impact Socket, Socket Size 1 5/16 in, Socket Shape 6-Point, Drive Type Impact, Drive Size 3/4 in, Compatible Fastener Type Bolts, No, Alloy Steel, Black Oxide, Impact Rated Yes, Socket Depth Standard, Socket Length 2 1/8 in more | go to store |
 | GREENLEE 825-4-1/8 Hole Saw,4-1/8 in. Dia.,Variable Pitch Hole Saw, Primary Material Application Steel, Materials Cut Steel, Arbor Design Not Included, Tooth Material Bi-Metal, Saw Dia. 4 1/8 in, Teeth per Inch 4/6, Max. Cutting Depth 1 5/8 in, Impact Rated No, Shank Size 1/2 in Round, 7/16 in Hex, Pilot... more | go to store |
 | CMT 838.285.11 Router Bit,2 Flutes,2-5/32 in. L Roundover Cut Profile Router Bit, Carbide Tipped, 1 1/8 in Cutter Dia., Fractional Inch, 1/2 in, 2 9/64 in, 1/4 in more | go to store |
 | IRWIN 3046012 Wood Drilling Bit,Steel,Bit Dia. 2-1/4" Set, Wood Drilling Bit, Self-Feed, Drill Bit Material Carbon Steel, Drill Bit Size 2 1/4 in, Shank Size 7/16 in, Overall Length 5 in, For Use With Wood, Number of Pieces 1 more | go to store |
 | AMIAD 700101-000298 Filter Screen,Black,1-1/4" Diameter Strainer Screen, Mesh Size 200 mesh, Micron Rating 80 micron, Diameter 3/4 in, Length 5 in, Screen Material Stainless Steel, Strainer Type Mesh, Maximum Temperature 140 Degrees F, Color Black, Compatible Mfr. Model Number 1-0701-1151-0000,... more | go to store |
Ads related to 1 4 to 1 5
