1 2 x 7 hot

Racing Butterfly Chinese Folding Bamboo Fan Retro Hand Paper Fans Wedding Dancing Decor

Description Material: bamboo + paper Size: open - 36.7 x 21cm / 14.44 x 8.26 close - 21 x 2.7 x 2.3 / 8.26 x 1.06 x 0.9 Package Include: 1pc x blank fan Features: Brand New & High Quality. This item is ideal for holidays and keeping cool in hot weather... more

Simpson Strong-Tie 2 in. x 18 in. Hot Dipped Galvanized Steel 7 Gauge Piling Strap - 1 Each - 2 In. x 18 In.

Simpson Strong Tie piling straps connect wood pilings to floor girders. Hot-dip galvanized for corrosion protection in coastal environments. Piling strap design loads must be determined by the designer for each installation. more

Racing Butterfly Chinese Folding Bamboo Fan Retro Hand Paper Fans Wedding Dancing Decor

Description Material: bamboo + paper Size: open - 36.7 x 21cm / 14.44 x 8.26 close - 21 x 2.7 x 2.3 / 8.26 x 1.06 x 0.9 Package Include: 1pc x blank fan Features: Brand New & High Quality. This item is ideal for holidays and keeping cool in hot weather... more

3/4 x 7-1/2 Hex Machine Bolt A307 Grade A Steel (Quantity: 10) Hot Dipped Galvanized Steel Coarse Thread Partially Threaded 3/4-10 x 7-1/2

Hex bolts are bolts with a hexagonal head on one end with no washer face on the bearing surface and a threaded shaft on the other end more

3/8 -16 x 3/4 x 6 x 7-1/2 Hot Dip Galvanized Eye Bolts (1 pcs.)

Diameter: 3/8 Diameter 2: 3/4 Length: 6 Material: Steel Finish: Hot Dip Galvanized Thread Size: 16 (Coarse) Type: Screw Eye Bolt Diameter 3: 1-1/2 Box of 1. more

1/2 -13 x 7-1/2 Hot Dipped Galvanized Hex Bolt Grade A Partial Thread Quantity 25 - by Homehours-

Hex Bolts are made of low carbon steel these fasteners are applicable for most low strength and industrial uses. Galvanized plating the bolt from corrosion; typically used in outdoor applications. more

1/2 -13 x 7 1/2 (PT) Coarse Thread A307 Grade A Hex Bolt Low Carbon Steel Hot Dip Galvanized Pk 10

PRODUCT SPECIFICATIONS Part #: 0000-127243 Fastener Type: Hex Bolt Size Description: 1/2 -13 x 7 1/2 (PT) Diameter/Nominal Size: 1/2 Length: 7 1/2 Thread Pitch: 13 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage: Partial System of... more

1/2 -13 x 7-1/2 Hot Dipped Galvanized Carriage Bolt w/Nuts & Flat Washers Quantity 25 - by Fastener Depot LLC

Coarse Thread Superior Corrosion Resistance Hot Dipped Galvanized Finish Grade A 6 Thread more

1/2 -13 x 7 1/2 (PT) Coarse Thread A307 Grade A Hex Bolt Low Carbon Steel Hot Dip Galvanized Pk 20

PRODUCT SPECIFICATIONS Part #: 0000-127243 Fastener Type: Hex Bolt Size Description: 1/2 -13 x 7 1/2 (PT) Diameter/Nominal Size: 1/2 Length: 7 1/2 Thread Pitch: 13 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage: Partial System of... more

1/2 x 7 1/2 Lag Screws / Steel / Hot Dip Galvanized (Quantity: 35 pcs)

Hex Lag Screws Manufactured to ASME B18.2.1 specifications Tensile Strength more

1/2 x 7 1/2 Lag Screws / Steel / Hot Dip Galvanized - 35 Piece Carton

Fastener SuperStore Offers Bulk Lag Screws - 1/2 x 7 1/2 / Steel / Hot Dip Galvanized in 35 Pc. Cartons more

1/2 -13 x 7 1/2 6 THD UNDER-SIZED Coarse Thread A307 Grade A Carriage Bolt Low Carbon Steel Hot Dip Galvanized Pk 25

PRODUCT SPECIFICATIONS Part #: 0000-126401 Fastener Type: Carriage Bolt Size Description: 1/2 -13 x 7 1/2 6 THD UNDER-SIZED Diameter/Nominal Size: 1/2 Length: 7 1/2 Thread Pitch: 13 Thread Pitch Type: Coarse Thread Direction: Right Thread Coverage: 6... more

1/2-13 x 7 1/2 Carriage Bolts / Steel / Hot Dip Galvanized - 100 Piece Carton

Fastener SuperStore Offers Bulk Carriage Bolts - 1/2-13 x 7 1/2 / Steel / Hot Dip Galvanized in 50 Pc. Cartons more

1/2 x 7 1/2 Hex Lag Screws | Gimlet Point | Low Carbon Steel | Hot Dip Galvanized (Quantity: 35)

1/2 x 7 1/2 Hex Lag Screws | Gimlet Point | Low Carbon Steel | Hot Dip Galvanized (Quantity: 35) more

1/2-13 x 7 1/2 Hex Machine Bolts / Steel / Hot Dip Galvanized - 80 Piece Carton

Fastener SuperStore Offers Bulk Hex Machine Bolts - 1/2-13 x 7 1/2 / Steel / Hot Dip Galvanized in 80 Pc. Cartons more

1/2 -13 x 7-1/2 Hot Dipped Galvanized Hex Bolt w/Nuts Grade A Partial Thread Quantity 25 - by Homehours-

Hex Bolts are made of low carbon steel these fasteners are applicable for most low strength and industrial uses. Galvanized plating the bolt from corrosion; typically used in outdoor applications. more

7/8 x 15/16 x 2-1/4 Hot Dip Galvanized Grade 2 Steel USS Flat Washers FLWSRS-247

Diameter: 15/16 Diameter 2: 2-1/4 Thickness: 11/64 Material: Steel Finish: Hot Dip Galvanized Thread Type: USS Hardness: Grade 2 Nominal Size: 7/8 Type: Flat Washer A flat washer is a thin usually round plate with a hole in the middle that is normally... more

7/8 x 15/16 x 2-1/4 Hot Dip Galvanized Grade 2 Steel USS Flat Washers FLWSRS-247

Diameter: 15/16 Diameter 2: 2-1/4 Thickness: 11/64 Material: Steel Finish: Hot Dip Galvanized Thread Type: USS Hardness: Grade 2 Nominal Size: 7/8 Type: Flat Washer A flat washer is a thin usually round plate with a hole in the middle that is normally... more

7/8 x 15/16 x 2-1/4 Hot Dip Galvanized Grade 2 Steel USS Flat Washers FLWSRS-247

Diameter: 15/16 Diameter 2: 2-1/4 Thickness: 11/64 Material: Steel Finish: Hot Dip Galvanized Thread Type: USS Hardness: Grade 2 Nominal Size: 7/8 Type: Flat Washer A flat washer is a thin usually round plate with a hole in the middle that is normally... more

7/8 x 15/16 x 2-1/4 Hot Dip Galvanized Grade 2 Steel USS Flat Washers FLWSRS-247

Diameter: 15/16 Diameter 2: 2-1/4 Thickness: 11/64 Material: Steel Finish: Hot Dip Galvanized Thread Type: USS Hardness: Grade 2 Nominal Size: 7/8 Type: Flat Washer A flat washer is a thin usually round plate with a hole in the middle that is normally... more

3/8 x 7/16 x 1-1/32 Hot Dip Galvanized Grade 2 Steel USS Flat Washers FLWSRS-136

Diameter: 7/16 Diameter 2: 1-1/32 Thickness: 5/64 Material: Steel Finish: Hot Dip Galvanized Thread Type: USS Hardness: Grade 2 Nominal Size: 3/8 Type: Flat Washer A flat washer is a thin usually round plate with a hole in the middle that is normally... more

3/8 x 7/16 x 1-1/32 Hot Dip Galvanized Grade 2 Steel USS Flat Washers FLWSRS-136

Diameter: 7/16 Diameter 2: 1-1/32 Thickness: 5/64 Material: Steel Finish: Hot Dip Galvanized Thread Type: USS Hardness: Grade 2 Nominal Size: 3/8 Type: Flat Washer A flat washer is a thin usually round plate with a hole in the middle that is normally... more

3/8 x 7/16 x 1-1/32 Hot Dip Galvanized Grade 2 USS Flat Washers (336 pcs.)

Diameter: 7/16 Diameter 2: 1-1/32 Thickness: 5/64 Material: Steel Finish: Hot Dip Galvanized Thread Type: USS Hardness: Grade 2 Nominal Size: 3/8 Type: Flat Washer Box of 336. A flat washer is a thin usually round plate with a hole in the middle that... more

3/8 -7 x 2 1/2 Hex Lag Screw Low Carbon Steel Hot Dip Galvanized Pk 50

PRODUCT SPECIFICATIONS Part #: 0000-117853 Fastener Type: Hex Lag Screw Size Description: 3/8 -7 x 2 1/2 Diameter/Nominal Size: 3/8 Length: 2 1/2 Thread Pitch: 7 Thread Direction: Right System of Measurement: Inch Material: Low Carbon Steel Finish: Hot... more

7/8-9 x 2 1/2 Structural Bolts / A325 / Hot Dip Galvanized - 50 Piece Carton

Fastener SuperStore Offers Bulk Structural Bolts - 7/8-9 x 2 1/2 / A325 / Hot Dip Galvanized in 50 Pc. Cartons more

1/2 x 7/8 Hot Dip Galvanized Grade 2 Steel Split Lock Washers LWS-297

Diameter: 1/2 Diameter 2: 7/8 Thickness: 1/8 Material: Steel Finish: Hot Dip Galvanized Hardness: Grade 2 Style: Medium Split Type: Lock Washer Application: Nuts and Bolts The purpose for a lock washer is to prevent threaded fasteners from loosening by... more

7/8 -9 x 2-1/2 Hot Dip Galvanized Steel Coarse Thread Coupling Nuts (75 pcs.)

Diameter: 7/8 Length: 2-1/2 Material: Steel Finish: Hot Dip Galvanized Driver Type: 1-1/4 Wrench Thread Size: 9 (Coarse) Type: Coupling Nut Box of 75. A coupling nut is a long nut tapped from each side to meet in the middle rather than all the way... more

3/8 -7 x 2 1/2 Hex Lag Screw Low Carbon Steel Hot Dip Galvanized Pk 225

PRODUCT SPECIFICATIONS Part #: 0000-117853 Fastener Type: Hex Lag Screw Size Description: 3/8 -7 x 2 1/2 Diameter/Nominal Size: 3/8 Length: 2 1/2 Thread Pitch: 7 Thread Direction: Right System of Measurement: Inch Material: Low Carbon Steel Finish: Hot... more

1/2 -13 x 7 Hot Dip Galvanized Grade 2 / A307 Steel Coarse Thread Carriage Bolts CBS-694

Diameter: 1/2 Length: 7 Material: Steel Finish: Hot Dip Galvanized Head Style: Carriage Thread Size: 13 (Coarse) Thread Length: Full Hardness: Grade 2 / A307 Type: Carriage Bolt Square-Depth: 9/32 A carriage bolt has a domed or countersunk head and the... more

3/8 -7 x 2 1/2 Hex Lag Screw Low Carbon Steel Hot Dip Galvanized Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-117853 Fastener Type: Hex Lag Screw Size Description: 3/8 -7 x 2 1/2 Diameter/Nominal Size: 3/8 Length: 2 1/2 Thread Pitch: 7 Thread Direction: Right System of Measurement: Inch Material: Low Carbon Steel Finish: Hot... more

1/2 x 7/8 Hot Dip Galvanized Grade 2 Steel Split Lock Washers LWS-297

Diameter: 1/2 Diameter 2: 7/8 Thickness: 1/8 Material: Steel Finish: Hot Dip Galvanized Hardness: Grade 2 Style: Medium Split Type: Lock Washer Application: Nuts and Bolts The purpose for a lock washer is to prevent threaded fasteners from loosening by... more

1/2 x 7/8 Hot Dip Galvanized Grade 2 Steel Split Lock Washers LWS-297

Diameter: 1/2 Diameter 2: 7/8 Thickness: 1/8 Material: Steel Finish: Hot Dip Galvanized Hardness: Grade 2 Style: Medium Split Type: Lock Washer Application: Nuts and Bolts The purpose for a lock washer is to prevent threaded fasteners from loosening by... more

3/8 -7 x 1 1/2 Hex Lag Screw Low Carbon Steel Hot Dip Galvanized Pk 100

PRODUCT SPECIFICATIONS Part #: 0000-115809 Fastener Type: Hex Lag Screw Size Description: 3/8 -7 x 1 1/2 Diameter/Nominal Size: 3/8 Length: 1 1/2 Thread Pitch: 7 Thread Direction: Right System of Measurement: Inch Material: Low Carbon Steel Finish: Hot... more

3/8 -7 x 1 1/2 Hex Lag Screw Low Carbon Steel Hot Dip Galvanized Pk 275

PRODUCT SPECIFICATIONS Part #: 0000-115809 Fastener Type: Hex Lag Screw Size Description: 3/8 -7 x 1 1/2 Diameter/Nominal Size: 3/8 Length: 1 1/2 Thread Pitch: 7 Thread Direction: Right System of Measurement: Inch Material: Low Carbon Steel Finish: Hot... more

3/8 -7 x 1 1/2 Hex Lag Screw Low Carbon Steel Hot Dip Galvanized Pk 50

PRODUCT SPECIFICATIONS Part #: 0000-115809 Fastener Type: Hex Lag Screw Size Description: 3/8 -7 x 1 1/2 Diameter/Nominal Size: 3/8 Length: 1 1/2 Thread Pitch: 7 Thread Direction: Right System of Measurement: Inch Material: Low Carbon Steel Finish: Hot... more

3/8 -7 x 1 1/2 Hex Lag Screw Low Carbon Steel Hot Dip Galvanized Pk 550

PRODUCT SPECIFICATIONS Part #: 0000-115809 Fastener Type: Hex Lag Screw Size Description: 3/8 -7 x 1 1/2 Diameter/Nominal Size: 3/8 Length: 1 1/2 Thread Pitch: 7 Thread Direction: Right System of Measurement: Inch Material: Low Carbon Steel Finish: Hot... more

1/2 -6 x 7 Hex Lag Screw Low Carbon Steel Hot Dip Galvanized Pk 25

PRODUCT SPECIFICATIONS Part #: 0000-125925 Fastener Type: Hex Lag Screw Size Description: 1/2 -6 x 7 Diameter/Nominal Size: 1/2 Length: 7 Thread Pitch: 6 Thread Direction: Right System of Measurement: Inch Material: Low Carbon Steel Finish: Hot Dip... more

7/16 -14 x 4 1/2 Coarse Thread A307 Grade A Hex Bolt Low Carbon Steel Hot Dip Galvanized Pk 50

PRODUCT SPECIFICATIONS Part #: 0000-123363 Fastener Type: Hex Bolt Size Description: 7/16 -14 x 4 1/2 Diameter/Nominal Size: 7/16 Length: 4 1/2 Thread Pitch: 14 Thread Pitch Type: Coarse Thread Direction: Right System of Measurement: Inch Grade: A (2)... more